# Single-channel operation of LoRaMAC with Dragino LG01-N

**URL:** <https://www.thethingsnetwork.org/forum/t/single-channel-operation-of-loramac-with-dragino-lg01-n/36993>\
**Category:** Dragino\
**Created:** [May 14, 2020, 8:51am UTC](https://www.thethingsnetwork.org/forum/t/single-channel-operation-of-loramac-with-dragino-lg01-n/36993 "2020-05-14T08:51:22Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![arjanvanb](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/arjanvanb/32/46626_2.png) [@arjanvanb](https://www.thethingsnetwork.org/forum/u/arjanvanb)\
**Post date:** [May 14, 2020, 9:40am UTC](https://www.thethingsnetwork.org/forum/t/single-channel-operation-of-loramac-with-dragino-lg01-n/36993/3 "2020-05-14T09:40:45Z")

</div>

Please note that LoRaWAN devices or the TTN network servers cannot read the description you added. If your single-channel forwarder happens to receive traffic from TTN devices that would normally only be received by the other gateways (or TTN gateways that are not on the map), then [you might very well be disturbing their operations](https://www.thethingsnetwork.org/forum/t/low-cost-single-channel-rpi-gateway/31392/14). Remember this is long range radio.

 ![New Zealand](https://www.thethingsnetwork.org/forum/uploads/default/original/3X/c/3/c3237ea8c530fac7e850226d281ce03be5d90b70.png)

From the post you quoted:

> [@Dragino LG-01 connected but no packets](https://www.thethingsnetwork.org/forum/t/dragino-lg-01-connected-but-no-packets/27683/22):
>
> So the Single Channel gateway LG01/LG02 are not recommend to use for LoRaWAN gateway.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/single-channel-operation-of-loramac-with-dragino-lg01-n/36993)._
