# (Solved) Issue with Sodaq Autonomo/RN2483 ABP

**URL:** <https://www.thethingsnetwork.org/forum/t/solved-issue-with-sodaq-autonomo-rn2483-abp/3283>\
**Category:** End Devices (Nodes)\
**Created:** [August 28, 2016, 2:29pm UTC](https://www.thethingsnetwork.org/forum/t/solved-issue-with-sodaq-autonomo-rn2483-abp/3283 "2016-08-28T14:29:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ubergesundheit](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/u/7ea924/32.png) [@ubergesundheit](https://www.thethingsnetwork.org/forum/u/ubergesundheit)\
**Post date:** [August 28, 2016, 2:29pm UTC](https://www.thethingsnetwork.org/forum/t/solved-issue-with-sodaq-autonomo-rn2483-abp/3283/1 "2016-08-28T14:29:25Z")

</div>

Hi everyone,

I am using a Sodaq Autonomo with the attached RN2483 and I have the following problem:  
After I register the device (ABP) through staging.thethingsnetwork, Packet transmissions works great. I see the messages on the website and also receive them through mqtt.

But after the third time or so I power the device, packets don’t get through ttn. I also have a Gateway (LinkLabs RPI Hat) here and the log says there are some forwarded packets but as I said, none of the packets come through.

If I then register a new device through ABP and transfer the Ids and Keys to the autonomo packets come trough until I unpower the device and repower it.

I am willing to give more details of both the node and the gateway to solve my problem.

Cheers,  
ubergesundheit

---

<div class="post-metadata">

**Author:** ![arjanvanb](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/arjanvanb/32/46626_2.png) [@arjanvanb](https://www.thethingsnetwork.org/forum/u/arjanvanb)\
**Post date:** [August 28, 2016, 2:33pm UTC](https://www.thethingsnetwork.org/forum/t/solved-issue-with-sodaq-autonomo-rn2483-abp/3283/2 "2016-08-28T14:33:50Z")

</div>

Your node is sending outdated frame counters. See [https://www.thethingsnetwork.org/wiki/LoRaWAN/Security](https://www.thethingsnetwork.org/wiki/LoRaWAN/Security) and:

[https://www.thethingsnetwork.org/forum/t/abp-node-stopped-working-fixed-by-creating-new-abp-why/3200](https://www.thethingsnetwork.org/forum/t/abp-node-stopped-working-fixed-by-creating-new-abp-why/3200)

---

<div class="post-metadata">

**Author:** ![ubergesundheit](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/u/7ea924/32.png) [@ubergesundheit](https://www.thethingsnetwork.org/forum/u/ubergesundheit)\
**Post date:** [August 28, 2016, 2:54pm UTC](https://www.thethingsnetwork.org/forum/t/solved-issue-with-sodaq-autonomo-rn2483-abp/3283/3 "2016-08-28T14:54:18Z")

</div>

Aaah 😃 Thank you very much! Seems like a rookies error! Should’ve read the docs before jumping into the cold water