# SX1262 Applications

**URL:** <https://www.thethingsnetwork.org/forum/t/sx1262-applications/28685>\
**Category:** End Devices (Nodes)\
**Created:** [August 4, 2019, 5:02am UTC](https://www.thethingsnetwork.org/forum/t/sx1262-applications/28685 "2019-08-04T05:02:52Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![LoRaTracker](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/loratracker/32/48502_2.png) [@LoRaTracker](https://www.thethingsnetwork.org/forum/u/LoRaTracker)\
**Post date:** [August 8, 2019, 4:37pm UTC](https://www.thethingsnetwork.org/forum/t/sx1262-applications/28685/16 "2019-08-08T16:37:40Z")

</div>

> [@cslorabox](#):
>
> I’m not sure this really different on the air, vs. different in how you configure it, but it could be interesting to ask Semtech about if there’s a way to do so

Oh I have, and the developer portal guys did say how the LoRa sync word is configured, but as far as I know there is no explanation in the data sheets. Can you spot how its done, in essense (SX126x 16bit versus SX127x 8bit)

0x3444 = 0x34  
0x1424 = 0x12

I too have noticed the detection of sync word is ‘leaky’ (I do like to check these things) which you might be inclined to think is a bug or at least worthy of a proper explanation.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/sx1262-applications/28685)._
