# TBMH100 indoor gateway problem **URL:** \ **Category:** TTIG - The Things Indoor Gateway\ **Created:** [December 24, 2019, 10:57pm UTC](https://www.thethingsnetwork.org/forum/t/tbmh100-indoor-gateway-problem/32915 "2019-12-24T22:57:21Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![Jeff-UK](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jeff-uk/32/35697_2.png) [@Jeff-UK](https://www.thethingsnetwork.org/forum/u/Jeff-UK)\ **Post date:** [November 29, 2020, 11:46am UTC](https://www.thethingsnetwork.org/forum/t/tbmh100-indoor-gateway-problem/32915/7 "2020-11-29T11:46:37Z")
Are you seeing node traffic comming through ok (check message metadata to see if your GW is listed as one of the ones passing messages through)…if so your GW is functining ok and you may be a victim of: > [@TTN V2 Console not working properly all the time](https://www.thethingsnetwork.org/forum/t/ttn-console-not-working-properly-all-the-time-console-gateway-not-connected-no-traffic-application-no-data/37915): > > The TTN Console is not working properly all the time The following issues can manifest: Gateway is shown in TTN Console as ‘not connected’ or e.g. ‘last seen 1 days ago’ while the gateway is actually connected. The disadvantage of this is that the TTN Console gateway status is unreliable and that the gateway Traffic cannot be monitored in the console. TTN Console shows no Data for an application and/or its devices, while the application actually does receive data from devices. The disadv… If no traffic then you may need TTN staff to enabe your specific EUI as above in the basic station bridge handler. --- _[View the full topic](https://www.thethingsnetwork.org/forum/t/tbmh100-indoor-gateway-problem/32915)._