The BARGAIN basement part 5

06%20PM

Elecrow has a one-time-per-user sale event where you can get 10 pcbs 10x10 cm (2 layers) for 0.99$ - plus shipping. Until June the 23th.

https://www.elecrow.com/blog/where-do-you-find-the-opportunity-to-experience-the-pcb-service-for-only-0-99-and-pcba-service-30-off/

Has somebody already bought one of these Chinese wind turbines and can share his experience?
I would like to buy one to add to a solar battery.

43%20PM

05%20AM

03%20PM

25%20AM

53%20PM

06%20AM

:no_mouth:

1 Like

41%20PM

… but can you get an RJ45 connector on the end of a cable through the gland?

1 Like

That’s why you crimp you own cables. Attach the RJ45 after threading the utp cable through the gland.

2 Likes

37%20PM

diy - https://www.ebay.com/itm/DC6V-12V-24V-Miniature-Hand-Crank-Wind-Hydraulic-Generator-Dynamotor-Motor-Hot/362652263223

Yes you can if you use a M20 gland.
The right make and model have sufficient turn-down on the gland to seal on the cable but are large enough to pass the RJ45 plug. The glands in the link are from the PG series, they are too small but an M20 is slightly larger and they work.

2 Likes

06%20PM

mchip-discount

21%20AM

You can also use a split gland.

1 Like

11%20PM

07%20AM