# The hard RAK831 cafe part 2

**URL:** <https://www.thethingsnetwork.org/forum/t/the-hard-rak831-cafe-part-2/10576>\
**Category:** RAK Gateways\
**Created:** [November 13, 2017, 11:38am UTC](https://www.thethingsnetwork.org/forum/t/the-hard-rak831-cafe-part-2/10576 "2017-11-13T11:38:28Z")\
**Posts on this page:** 1\
**Showing post:** 24

<div class="post-metadata">

**Author:** ![bluejedi](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/bluejedi/32/44639_2.png) [@bluejedi](https://www.thethingsnetwork.org/forum/u/bluejedi)\
**Post date:** [December 4, 2017, 10:51am UTC](https://www.thethingsnetwork.org/forum/t/the-hard-rak831-cafe-part-2/10576/24 "2017-12-04T10:51:08Z")

</div>

@jezd [The hard RAK831 cafe part 1 - #235 by jezd](https://www.thethingsnetwork.org/forum/t/the-hard-rak831-cafe-part-1/8464/235)

> who supplies the tall case?

**ModMyPi Cyntech Modular Cases for RPi 2/3**

Brochure: [The Ultimate Raspberry Pi & Maker Store– The Pi Hut](http://www.modmypi.com/download/mmp-modular-raspberry-pi-case.pdf)

Shop: [Raspberry Pi Cases | The Pi Hut](https://www.modmypi.com/raspberry-pi/cases-183/raspberry-pi-b-plus2-and-3-cases-1122/modmypi-rpi-a-plus-b-plus-2-and-3-cases-361)

_Recent versions of this case have light pipes on both sides of the micro-SD slot so they are suitable for both RPi 2 and RPi 3. The brochure shows the older RPi 2 case which has light pipes for RPi 2 only (RPi 3 does fit in the older version but you would not see the LEDs)._

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/the-hard-rak831-cafe-part-2/10576)._