# The WORKBENCH part 3

**URL:** <https://www.thethingsnetwork.org/forum/t/the-workbench-part-3/21125>\
**Category:** Hardware\
**Created:** [January 1, 2019, 3:01pm UTC](https://www.thethingsnetwork.org/forum/t/the-workbench-part-3/21125 "2019-01-01T15:01:16Z")\
**Posts on this page:** 1\
**Showing post:** 63

<div class="post-metadata">

**Author:** ![bluejedi](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/bluejedi/32/44639_2.png) [@bluejedi](https://www.thethingsnetwork.org/forum/u/bluejedi)\
**Post date:** [January 17, 2019, 7:21pm UTC](https://www.thethingsnetwork.org/forum/t/the-workbench-part-3/21125/63 "2019-01-17T19:21:07Z")

</div>

Appears to be a new Heltec board.  
It doesn’t look like a Pycom clone to me, although there are similarities in its looks.

For more details see below post in Big ESP32 + SX127x topic Part 3:

> [@Big ESP32 + SX127x topic part 3](https://www.thethingsnetwork.org/forum/t/big-esp32-sx127x-topic-part-3/18436/98):
>
> There appears to be a new Heltec ESP32 LoRa board: Heltec Wireless Stick [heltec%20wireless%20stick] New features (based on below specs / source): Apparently 800uA power consumption in sleep mode. (Disclaimer: this is my interpretation, formatting on page linked below is not clear about this.) A major improvement (while still 20+ times more than deep sleep current of ESP32) 16 MB flash. 0.49" OLED display. Yes that’s tiny! This will probably have 64x32 resolution. New Wifi Antenna design (…

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/the-workbench-part-3/21125)._