# TTIG and ADR **URL:** \ **Category:** TTKG - The Things Kickstarter Gateway\ **Created:** [November 7, 2019, 7:12pm UTC](https://www.thethingsnetwork.org/forum/t/ttig-and-adr/31521 "2019-11-07T19:12:58Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [November 8, 2019, 11:02am UTC](https://www.thethingsnetwork.org/forum/t/ttig-and-adr/31521/2 "2019-11-08T11:02:16Z")
maybe the node isn’t receiving always the downlink so it will try until reaches sf12 ? 'what if ’ you bring node and gw closer to test ? > [@TABS nodes from Tracknet (now Semtech)](https://www.thethingsnetwork.org/forum/t/tabs-nodes-from-tracknet-now-semtech/30955): > > Hi, I got some test-nodes: Tabs from Tracknet (now Semtech). Object locator TBOL Temperature and humidity sensor: TBHH Motion Sensor: TBMS I was able to get the TBOL get connected to the lorawan. (still have some problems to decode the payload) The two other sensors: no chance. they are sending, but the gateway does ignore them completely! Does anyone has some experience with these sensors? Thanks for info and perhabs exchange of information. The sensors look nice and are handy… --- _[View the full topic](https://www.thethingsnetwork.org/forum/t/ttig-and-adr/31521)._