# TTIG Problems, - no location data, wrong date/time, wrong channel and stability issues

**URL:** <https://www.thethingsnetwork.org/forum/t/ttig-problems-no-location-data-wrong-date-time-wrong-channel-and-stability-issues/29652>\
**Category:** TTIG - The Things Indoor Gateway\
**Created:** [September 4, 2019, 9:49pm UTC](https://www.thethingsnetwork.org/forum/t/ttig-problems-no-location-data-wrong-date-time-wrong-channel-and-stability-issues/29652 "2019-09-04T21:49:10Z")\
**Posts on this page:** 1\
**Showing post:** 102

<div class="post-metadata">

**Author:** ![Franz\_Refle](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/franz_refle/32/25844_2.png) [@Franz\_Refle](https://www.thethingsnetwork.org/forum/u/Franz_Refle)\
**Post date:** [December 15, 2019, 1:06pm UTC](https://www.thethingsnetwork.org/forum/t/ttig-problems-no-location-data-wrong-date-time-wrong-channel-and-stability-issues/29652/102 "2019-12-15T13:06:32Z")

</div>

According [TTIG : The Things Indoor Gateway](https://www.thethingsnetwork.org/forum/t/ttig-the-things-indoor-gateway/22049/95) I’ve placed a 470 Ohm SMD Resistor on the spare R86 position … this enables the (initially disabled) CP2102 and you get Debug Output on the USB Interface, it’s an alternative to using a RS232 / USB Bridge.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/ttig-problems-no-location-data-wrong-date-time-wrong-channel-and-stability-issues/29652)._