# TTN GATEWAY central

**URL:** <https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976>\
**Category:** TTKG - The Things Kickstarter Gateway\
**Created:** [December 5, 2017, 2:51pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976 "2017-12-05T14:51:24Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\
**Post date:** [December 5, 2017, 2:51pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/1 "2017-12-05T14:51:24Z")

</div>

- this is the central topic for all questions and answers regarding the **TTN** _GATEWAY_

![ttn -gwtopic](https://www.thethingsnetwork.org/forum/uploads/default/original/2X/8/85fa5afbb2cc95ee99052bea2f38375b0d0b7a77.jpg)

**where to buy :**

- [https://shop.thethingsnetwork.com/](https://shop.thethingsnetwork.com/)

- [http://www.farnell.com/](http://www.farnell.com/)

- [build your own network in 5 minutes](https://www.thethingsnetwork.org/the-things-products)

- [TTN Gateway - FAQ](https://www.thethingsnetwork.org/forum/t/ttn-gateway-faq/11173)

**getting started :**

- [activate your TTN gateway](https://activate.thethingsnetwork.org/)

part 2 is **[HERE](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central-2/13086/2)**  
part 3 is **[HERE](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central-3/18962)**

---

<div class="post-metadata">

**Author:** ![gfernandes](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/g/85f322/32.png) [@gfernandes](https://www.thethingsnetwork.org/forum/u/gfernandes)\
**Post date:** [December 7, 2017, 4:30pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/3 "2017-12-07T16:30:53Z")

</div>

I wanted to know the kind of GPS and other details used by the TTN gateway. Can anyone direct me to the link of the datasheet of TTN gateway that has all the details inorder to evaluate it before purchasing? Thank you.

---

<div class="post-metadata">

**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\
**Post date:** [December 7, 2017, 4:37pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/4 "2017-12-07T16:37:42Z")

</div>

> [@gfernandes](#):
>
> the kind of GPS

there is no GPS build in…[here](http://uk.farnell.com/the-things-network/ttn-gw-868/the-things-gateway-eu/dp/2675813#anchorTechnicalDOCS) some more details, I don’t know if there is a enhanced tech document available at this moment.

---

<div class="post-metadata">

**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\
**Post date:** [December 7, 2017, 6:28pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/6 "2017-12-07T18:28:15Z")

</div>

![ttn-gw-pcb](https://www.thethingsnetwork.org/forum/uploads/default/original/2X/8/81b827a47fba2cbf773a3c091479cc52ba863a2d.jpg)

---

<div class="post-metadata">

**Author:** ![Leondegeling](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/leondegeling/32/9409_2.png) [@Leondegeling](https://www.thethingsnetwork.org/forum/u/Leondegeling)\
**Post date:** [December 8, 2017, 2:31pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/7 "2017-12-08T14:31:28Z")

</div>

Hi, today I received my TTN gateway and have spent over 2 hours trying to install it.  
It seems stuck when it tries to connect to my wifi. It cycles from 1.5 leds trough to 2.5 leds but never connects. I am sitting a meter from the fritzbox so milage should not be a problem. Is there some reset button on the device or is there another way to really restart the installation? I have no idea how to proceed.

thanks for any help

---

<div class="post-metadata">

**Author:** ![kersing](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/kersing/32/44777_2.png) [@kersing](https://www.thethingsnetwork.org/forum/u/kersing)\
**Post date:** [December 8, 2017, 3:02pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/8 "2017-12-08T15:02:56Z")

</div>

There is a button inside the gateway. To open it, put it down with the antenna socket at the top and (gently) lift the left and right sides of the white shield. (To close align the lid and push firmly at the sides only you hear it snap in place)

To reset, power on while pressing the ‘Mode button’ shown in the picture above (it is the pink one in the middle of the PCB). All leds should flash for some time.

I haven’t succeeded in using wifi, after three (failed) attempts I just reset the unit and put a network cable in.

@johan Are there known issues with WiFi? Is there any way to debug it?

Did you order from Farnell/element14?

---

<div class="post-metadata">

**Author:** ![arjanvanb](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/arjanvanb/32/46626_2.png) [@arjanvanb](https://www.thethingsnetwork.org/forum/u/arjanvanb)\
**Post date:** [December 8, 2017, 3:16pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/9 "2017-12-08T15:16:52Z")

</div>

> [@kersing](#):
>
> I haven’t succeeded in using wifi

I doubt it helps (and if it’s useless, then feel very free to delete this post), but there’s a February 2017 sneak preview on YouTube:

[![](https://www.thethingsnetwork.org/forum/uploads/default/original/3X/a/8/a8d90d585cecc84672b8450b0e39b05ffb5fb6a5.jpeg "The Things Gateway - Activation Process - Sneak Peak") ](https://www.youtube.com/watch?v=UD1HAw5PQqU)

---

<div class="post-metadata">

**Author:** ![rish](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/r/46a35a/32.png) [@rish](https://www.thethingsnetwork.org/forum/u/rish)\
**Post date:** [December 8, 2017, 4:19pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/10 "2017-12-08T16:19:00Z")

</div>

**Configuration**

The gateway is configurable via the [https://activate.thethingsnetwork.org](https://activate.thethingsnetwork.org).

Device information can be checked locally by the internal web server’s `/info`​ ​page. If all is well then the gateway registers with DNS name `things-gateway` or `things-gateway.local`, so once connected to your WiFi or ethernet network then [http://things-gateway/info](http://things-gateway/info) and/or [http://things-gateway.local/info](http://things-gateway.local/info) might work without the need to find its IP address.

Once activation is performed successfully, the configuration is locked and can be only  
unlocked via an erase.

**Reset Button**

- Pressing the button shortly while powered on restarts the gateway.
- Holding the button for 2 seconds while powered on it erased the WiFi settings.
- Holding the button for 5 seconds while powered on it erases the WiFi settings and activation settings.
- Holding the button while powering on it will erase the full serial flash

  

**LED Indication**

  

| **LED** | **State** | **Reason** | **Cause** | **User Action** |
| 1 - Power | Off | No software is running | No power; Incorrect firmware loaded. | Make sure the device is powered and the correct firmware is loaded. |
| &nbsp; | On | Software is loaded | &nbsp; | &nbsp; |
| &nbsp; | Slow | Software update in progress | &nbsp; | Wait |
| 2 - Internet | Fast | No Ethernet or  
WiFi connection.  
Only possible way  
to connect is via  
the Gateway’s  
AP. | No Ethernet link and WiFi connection failed | Connect to TTN gateway - AP |
| &nbsp; | Slow | Checking for internet | &nbsp; | &nbsp; |
| &nbsp; | On | Has internet | &nbsp; | &nbsp; |
| 3 - Configuration | Fast | Bad configuration | No ID | Need to configure a gateway ID on the device |
| &nbsp; | Already activated | Need to configure valid key on the device |
| &nbsp; | Invalid key | Need to configure valid keey on the device |
| &nbsp; | No router | Need to configure router in the TTN console |
| &nbsp; | Invalid URL | Correct URL in the TTN console |
| &nbsp; | Slow | Activating | &nbsp; | &nbsp; |
| &nbsp; | On | Activation successful | &nbsp; | &nbsp; |
| 4 - Connection | Slow | Connecting | &nbsp; | MQTT |
| &nbsp; | On | Connected | &nbsp; | MQTT |
| 5 - Activity | Single | Uplink/Downlink | &nbsp; | &nbsp; |

  

**Note:**

While on step 2 of the activation process - “_Connect to the gateways WiFi access point Things-Gateway-XXXX_”, make sure to forget the WiFi access point from your computer once you move to step 3. Otherwise it will keep interfering with the gateway.

We are working on releasing an extended version of the FAQ section for activating the gateway. Will be posted early next week.

---

<div class="post-metadata">

**Author:** ![Leondegeling](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/leondegeling/32/9409_2.png) [@Leondegeling](https://www.thethingsnetwork.org/forum/u/Leondegeling)\
**Post date:** [December 9, 2017, 10:42am UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/11 "2017-12-09T10:42:28Z")

</div>

So today I resetted the device (power up holding the pink button). I went through the setup again, this time I connected an ethernetcable.  
I am able to connect to the device using things-gateway-xxxx but as soon as I hit the configure button all leds turn of and on and it starts the following sequence

[No leds  
Five leds  
1.5 leds  
2.5 leds  
2 leds]  
repeat

To me it sounds like some watchdog timer is going off that resets the device just before activation. When it resest all leds on the pcb also turn off for a moment. The units looks good and undamaged, I see the orangs led on the networkconnector flashing every now and then. All connector seem in order, there are no jumpers on the pcb.

When I browse to the device and go to the /info page I get

Version Info   
Hardware: v1  
Bootloader: r1-7167873a (2017-06-02T13:48:18Z)  
Firmware: v1.0.0-917719b9 (2017-06-26T17:59:33Z)

Network Uptime:365  
Connected: true  
Interface: WIFI & Ethernet  
Wifi SSID: wijkaanzee

Configuration   
Activation locked:true  
Config correct: false  
Region:   
Gateway Card:ND

Packet forwarding   
Broker connection:false  
Packets up: 0  
Packets down: 0

Miscellaneous   
External storage:false

I guess the config correct being false is not a good thing but i have clue how to correct this

Any help or ideas would be greatly apreciated, I can’t wait to get started.

---

<div class="post-metadata">

**Author:** ![arjanvanb](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/arjanvanb/32/46626_2.png) [@arjanvanb](https://www.thethingsnetwork.org/forum/u/arjanvanb)\
**Post date:** [December 9, 2017, 6:43pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/12 "2017-12-09T18:43:39Z")

</div>

> [@Leondegeling](#):
>
> I guess the config correct being false is not a good thing but i have clue how to correct this

I guess so too… So, did you try the following?

> [@rish](#):
>
> Holding the button for 5 seconds while powered on it erases the WiFi settings and activation settings.

(I’ve no idea; I’m just repeating what I read above.)

---

<div class="post-metadata">

**Author:** ![kersing](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/kersing/32/44777_2.png) [@kersing](https://www.thethingsnetwork.org/forum/u/kersing)\
**Post date:** [December 9, 2017, 8:57pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/13 "2017-12-09T20:57:43Z")

</div>

My gateways info page shows only Ethernet. When I tried to have the gateway connect to WIFI it would not work, to get it to connect to Ethernet I used the ‘push button while power on’ method where I held the button for over 10 seconds.

With regards to the ‘config correct’, take a look at the gateway information in the TTN console. ([https://console.thethingsnetwork.org/](https://console.thethingsnetwork.org/)), go to your gateway settings page.  
Check the frequency plan is set to ‘Europe 868MHz’ and the router to ‘ttn-router-eu’. Please make a screen shot if these values are not set to these values and post it, next correct the values and save them. Then reboot the gateway.

---

<div class="post-metadata">

**Author:** ![kersing](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/kersing/32/44777_2.png) [@kersing](https://www.thethingsnetwork.org/forum/u/kersing)\
**Post date:** [December 10, 2017, 12:30am UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/15 "2017-12-10T00:30:21Z")

</div>

Hi @rish

Thank you for the detailed information, very useful.

However I am looking for an option to debug why the gateway will not connect to my WiFi. During setup the SSID is shown as a choice once I type the first character so the gateway sees the router. However after entering the password and saving the configuration the gateway refuses to connect to WiFi.

---

<div class="post-metadata">

**Author:** ![Leondegeling](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/leondegeling/32/9409_2.png) [@Leondegeling](https://www.thethingsnetwork.org/forum/u/Leondegeling)\
**Post date:** [December 10, 2017, 7:35pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/16 "2017-12-10T19:35:09Z")

</div>

> [@kersing](#):
>
> ot connect to my WiFi. During setup the SSID is shown as a choice once I type the first character so the gateway sees the router. However after entering the password and saving the configuration the gateway refuses to connect to WiFi.

I resetted again and again and again but it will not send its first message, not in wifi mode, not with the ethernet cable. I did check the gateway information as you suggested, the router was set to [dev] instead of [ttn-router-eu]. I changed that but it did not help at all, I still get not further.

---

<div class="post-metadata">

**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\
**Post date:** [December 12, 2017, 9:13am UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/17 "2017-12-12T09:13:43Z")

</div>

how is the situation now… did you get it to work ?

---

<div class="post-metadata">

**Author:** ![Leondegeling](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/leondegeling/32/9409_2.png) [@Leondegeling](https://www.thethingsnetwork.org/forum/u/Leondegeling)\
**Post date:** [December 12, 2017, 9:50am UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/18 "2017-12-12T09:50:39Z")

</div>

No, I tried everything I can think of, resetted numerous times, tried wifi and ethernet doublechecked everything but the device will not register and not send messages. I have not found any usable documentation and I have no idea how to get any support.

---

<div class="post-metadata">

**Author:** ![bsiege](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/bsiege/32/46459_2.png) [@bsiege](https://www.thethingsnetwork.org/forum/u/bsiege)\
**Post date:** [December 12, 2017, 4:50pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/19 "2017-12-12T16:50:37Z")

</div>

That gives a bad feeling about the first gateways out in the wild. Not another “WiFi-Gate”, please!!! Bluetooth is on board but not supported yet? Anyway, i do not need BT and WiFi. Hope at least LoRA and Ethernet works as intended.

---

<div class="post-metadata">

**Author:** ![arjanvanb](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/arjanvanb/32/46626_2.png) [@arjanvanb](https://www.thethingsnetwork.org/forum/u/arjanvanb)\
**Post date:** [December 12, 2017, 8:10pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/20 "2017-12-12T20:10:50Z")

</div>

@kersing, @Leondegeling, I’d doubt it matters for the firmware, but just in case it helps TTN debugging:

Do you have any idea which of the many IEEE 802.11 versions (802.11b, 802.11g, 802.11n, 802.11ac, …) and frequency (2.4 or 5 GHz) your WiFi access point and your gateway have selected to use? Can you see some activity in the admin interface of your WiFi access point?

@rish, any requirements for the WiFi?

---

<div class="post-metadata">

**Author:** ![pfiadi](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/pfiadi/32/9069_2.png) [@pfiadi](https://www.thethingsnetwork.org/forum/u/pfiadi)\
**Post date:** [December 13, 2017, 10:33am UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/21 "2017-12-13T10:33:30Z")

</div>

I had a hard to configure my ttn backer edition gateway which I received from Farnell yesterday. Unfortunately it keeps rebooting for unknown reasons (Wifi or ethernet make no difference). Every now and then I can see it in my TTN console for a few seconds. Any idea what is going on?

---

<div class="post-metadata">

**Author:** ![Leondegeling](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/leondegeling/32/9409_2.png) [@Leondegeling](https://www.thethingsnetwork.org/forum/u/Leondegeling)\
**Post date:** [December 13, 2017, 10:50am UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/22 "2017-12-13T10:50:12Z")

</div>

My ap is a fritzbox supporting a, b, g, n 2,4 ghz and 5ghz

---

<div class="post-metadata">

**Author:** ![Siso1](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/siso1/32/35697_2.png) [@Siso1](https://www.thethingsnetwork.org/forum/u/Siso1)\
**Post date:** [December 13, 2017, 11:03am UTC](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976/23 "2017-12-13T11:03:01Z")

</div>

Here the same, the gateway is working ( ethernet cable ) but rebooting often.

[Next page](https://www.thethingsnetwork.org/forum/t/ttn-gateway-central/10976.md?page=2)
