# TTN no data Forwarding from Gateway to App **URL:** \ **Category:** TTN Network and Services\ **Created:** [September 29, 2021, 9:11am UTC](https://www.thethingsnetwork.org/forum/t/ttn-no-data-forwarding-from-gateway-to-app/51946 "2021-09-29T09:11:38Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![sysix09](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/sysix09/32/35697_2.png) [@sysix09](https://www.thethingsnetwork.org/forum/u/sysix09)\ **Post date:** [September 29, 2021, 9:11am UTC](https://www.thethingsnetwork.org/forum/t/ttn-no-data-forwarding-from-gateway-to-app/51946/1 "2021-09-29T09:11:38Z")
Hi @ all, I’m trying to get my first LoRaWAN Application running but I have Problems with the message forwarding. I added a LoRa-indoor-Gateway to the Network which is showing that my device is successfully transmitting Data. At first, I had a connection between the device and the application. (I could see the data inside the Live data console) After a Hardware reset at the Arduino uno the data was only shown inside the gateway console and not in the application. Somehow the data received from the gateway is not transmitted to my application. I tried to follow along the solving process at [TTN Console shows uplink traffic in gateway, but no data in application](https://www.thethingsnetwork.org/forum/t/ttn-console-shows-uplink-traffic-in-gateway-but-no-data-in-application/21476) **Hardware:** - Adruino Uno R3 - LoRa Sheld (Dragino v1.4) - TTIG (EU-Version [https://www.thethingsnetwork.org/docs/gateways/thethingsindoor/](https://www.thethingsnetwork.org/docs/gateways/thethingsindoor/)) **Code:** - the sample from Dragino via ADP ([Lora/lora\_shield\_ttn.ino at master · dragino/Lora · GitHub](https://github.com/dragino/Lora/blob/master/Lora%20Shield/Examples/lora_shield_ttn/lora_shield_ttn.ino)) worked successfully 2 Days ago. It even forwarded the data Packages to the Application. - After restarting my Arduino Uno (by hard reset/ power off – power on) I could see that the packages were received by the Gateway but not forwarded to the Application. - Also tried to run this code [arduino-lmic/ttn-abp.ino at master · matthijskooijman/arduino-lmic · GitHub](https://github.com/matthijskooijman/arduino-lmic/blob/master/examples/ttn-abp/ttn-abp.ino) with the pin mapping for the Dragino LoRa Sheld ```auto // Pin mapping for loRa Dragino v1.4 const lmic_pinmap lmic_pins = { .nss = 10, .rxtx = LMIC_UNUSED_PIN, .rst = 9, .dio = {2, 6, 7}, }; ``` **What I did:** 1. created and claimed a Gateway 2. created a new app in TTN 3. created a new device to this new app (ABP/MACv1.0.3) 4. replaced the ABP keys in the sketch (NWKSKEY, APPSKEY, DEVADDR) compiled it - run the sketch with no errors 5. I see traffic on the Gateway 6. I don’t see traffic in the app **App Device Config:** ![Screenshot 2021-09-29 110400](https://www.thethingsnetwork.org/forum/uploads/default/original/3X/5/a/5a3e3ffd76ceeaa5524171b6ecd4051c82048be8.png) **Gateway Console View** ![Screenshot 2021-09-29 094558](https://www.thethingsnetwork.org/forum/uploads/default/original/3X/a/8/a8acd918968636fd136292ad166e532e42dc9480.png) **Device Console** ```auto 09:21:53.649 -> Starting 09:25:13.295 -> Packet queued 09:25:15.536 -> 12619068: EV_TXCOMPLETE (includes waiting for RX windows) [...] 09:27:59.625 -> Packet queued 09:28:01.876 -> 23016402: EV_TXCOMPLETE (includes waiting for RX windows) ``` **Additional info’s:** - no payload formatters are in use/implemented for the application or the specific device - Gateway Server address: eu1.cloud.thethings.network - Frequency plan EU\_863\_870\_TTN ---
**Author:** ![Jeff-UK](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jeff-uk/32/35697_2.png) [@Jeff-UK](https://www.thethingsnetwork.org/forum/u/Jeff-UK)\ **Post date:** [September 29, 2021, 9:26am UTC](https://www.thethingsnetwork.org/forum/t/ttn-no-data-forwarding-from-gateway-to-app/51946/2 "2021-09-29T09:26:51Z")
> [@sysix09](#): > > At first, I had a connection between the device and the application. (I could see the data inside the Live data console) After a Hardware reset at the Arduino uno the data was only shown inside the gateway console and not in the application. Did you persist the F\_Count data either side of the reset? If not, if you dont disable f-count checks, the back end will see the count start again from zero and will assume a replay attack until the device has reached a count where it is larger than the last seen value - try disabling F\_Count checks (not recommended long term for deployment - unless using ABP) to see if solves problem - then look at how to improve handling for deployment. Note: A successful OTAA join will reset count at both sides consecutively avoiding this problem, and is inherently more secure that ABP. ---
**Author:** ![sysix09](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/sysix09/32/35697_2.png) [@sysix09](https://www.thethingsnetwork.org/forum/u/sysix09)\ **Post date:** [September 29, 2021, 11:56am UTC](https://www.thethingsnetwork.org/forum/t/ttn-no-data-forwarding-from-gateway-to-app/51946/3 "2021-09-29T11:56:15Z")
Hi Jeff, thanks a lot for that tip! It finaly works with ABP! **Documentation for future reader:** I changed the Fcnt Reset Frame Counter at: MyApp → End devices → my-abp-device → General Settings → Network layer → Reset Frame Counters (checked) Note: do not use in production additional infos: [https://www.thethingsnetwork.org/docs/network/cli/api/](https://www.thethingsnetwork.org/docs/network/cli/api/) After adjusting the code to store the Fcnt inside the eprom of the device the value could be set disabled again. ---
**Author:** ![system](https://www.thethingsnetwork.org/forum/uploads/default/original/3X/6/2/6250ea44fd2b0d6259489e1a92748df681e1f970.png) [@system](https://www.thethingsnetwork.org/forum/u/system)\ **Post date:** [September 30, 2021, 11:56am UTC](https://www.thethingsnetwork.org/forum/t/ttn-no-data-forwarding-from-gateway-to-app/51946/4 "2021-09-30T11:56:39Z")
This topic was automatically closed 24 hours after the last reply. New replies are no longer allowed.