# TTN UNO - BETA release - Documentation

**URL:** <https://www.thethingsnetwork.org/forum/t/ttn-uno-beta-release-documentation/290>\
**Category:** TTKG - The Things Kickstarter Gateway\
**Created:** [October 19, 2015, 4:35pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-uno-beta-release-documentation/290 "2015-10-19T16:35:53Z")\
**Posts on this page:** 1\
**Showing post:** 19

<div class="post-metadata">

**Author:** ![Michael](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/m/4bbf92/32.png) [@Michael](https://www.thethingsnetwork.org/forum/u/Michael)\
**Post date:** [October 27, 2015, 3:00pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-uno-beta-release-documentation/290/19 "2015-10-27T15:00:25Z")

</div>

Are you connected to a gateway?

The “join: ok accepted” message unfortunately does -not- tell you, if you have connected to a gateway.

for testing purposes you can also use [iot.semtech.com](http://iot.semtech.com) port 1680/1680 and then see if it shows up here:  
[http://iot.semtech.com/gateways/](http://iot.semtech.com/gateways/)

I’m also experimenting with [www.loriot.io](http://www.loriot.io) .For now it looks to be the only one who supports confirmed messages.  
Problem with them is that every transmission includes a frame counter, and after modifying the sketch or reconnecting power, the frame counter is set to zero, and messages do not show up anymore.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/ttn-uno-beta-release-documentation/290)._