# TTN uplink node Node-Red connected but not working

**URL:** <https://www.thethingsnetwork.org/forum/t/ttn-uplink-node-node-red-connected-but-not-working/31959>\
**Category:** Application Development\
**Created:** [November 20, 2019, 12:47pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-uplink-node-node-red-connected-but-not-working/31959 "2019-11-20T12:47:01Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![htdvisser](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/htdvisser/32/45312_2.png) [@htdvisser](https://www.thethingsnetwork.org/forum/u/htdvisser)\
**Post date:** [November 20, 2019, 1:12pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-uplink-node-node-red-connected-but-not-working/31959/2 "2019-11-20T13:12:08Z")

</div>

This is verly likely because [we had to disable uplink fields on MQTT](https://status.thethings.network/incidents/z25436h9zxwq) because those were causing a lot of trouble. We intend to re-enable them when we have found a solution for the underlying problem, but that may take some time.

To work around this, you can empty the “Field” of your “ttn uplink” node, and use a function to select the fields you want from of the object that you will then get out of the “ttn uplink” node.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/ttn-uplink-node-node-red-connected-but-not-working/31959)._
