# ULX3S FPGA board sends first message to TTN **URL:** \ **Category:** Uncategorized\ **Created:** [November 2, 2018, 9:56pm UTC](https://www.thethingsnetwork.org/forum/t/ulx3s-fpga-board-sends-first-message-to-ttn/19384 "2018-11-02T21:56:45Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![mistery](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/mistery/32/25844_2.png) [@mistery](https://www.thethingsnetwork.org/forum/u/mistery)\ **Post date:** [April 28, 2019, 2:56pm UTC](https://www.thethingsnetwork.org/forum/t/ulx3s-fpga-board-sends-first-message-to-ttn/19384/4 "2019-04-28T14:56:55Z")
Just a few quick news about this board. We had very nice workshop about using FPGA you can check material here: [https://github.com/ulx3s/fpga-odysseus/blob/master/presentation/FPGA%20Odysseus.pdf](https://github.com/ulx3s/fpga-odysseus/blob/master/presentation/FPGA%20Odysseus.pdf) I have designed LoRa PMOD shield among other shields for this board here: [https://github.com/goran-mahovlic/ulx3s-PMOD/blob/master/pic/LoRa\_Rotate.png](https://github.com/goran-mahovlic/ulx3s-PMOD/blob/master/pic/LoRa_Rotate.png) I already have it assembled but did not have time to test … Konrad Beckmann designed SX1257 PMOD [https://twitter.com/kbeckmann/status/1081959290213142530](https://twitter.com/kbeckmann/status/1081959290213142530) And last, where I need you help is that I submitted ULX3S to hackaday prize so it would be nice if I can get your like on [hackaday.io](http://hackaday.io) page [https://hackaday.io/project/159108-ulx3s-powerful-ecp5-board-for-open-source-fpga](https://hackaday.io/project/159108-ulx3s-powerful-ecp5-board-for-open-source-fpga) We are currently at the 3. place, but it would be nice to stay in top 20. in a first round to get 500$ for parts and to lower next production costs! --- _[View the full topic](https://www.thethingsnetwork.org/forum/t/ulx3s-fpga-board-sends-first-message-to-ttn/19384)._