# Uplink messages not arriving anymore

**URL:** <https://www.thethingsnetwork.org/forum/t/uplink-messages-not-arriving-anymore/48696>\
**Category:** Uncategorized\
**Created:** [June 11, 2021, 9:45am UTC](https://www.thethingsnetwork.org/forum/t/uplink-messages-not-arriving-anymore/48696 "2021-06-11T09:45:41Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![descartes](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/descartes/32/47220_2.png) [@descartes](https://www.thethingsnetwork.org/forum/u/descartes)\
**Post date:** [June 17, 2021, 2:38pm UTC](https://www.thethingsnetwork.org/forum/t/uplink-messages-not-arriving-anymore/48696/12 "2021-06-17T14:38:05Z")

</div>

> [@kersing](#):
>
> @descartes You are probably more experienced in reset ABP counters. Any hints?

Ha, I only use ABP for firmware radio tests and only when I’m testing firmware communications states, I’ve got the radio off the rest of the time as that bit is mostly a given.

`ttn-lw-cli end-devices reset [application-id] [device-id] --mac-settings.resets-f-cnt true`

The CLI install instructions are here:

[https://www.thethingsindustries.com/docs/getting-started/cli/installing-cli/](https://www.thethingsindustries.com/docs/getting-started/cli/installing-cli/)

It is the only tool to provide total access to all the stack settings.

Easier to navigate but due for an update:

[http://descartes.co.uk/TTSv3CLI.html](http://descartes.co.uk/TTSv3CLI.html)

as I am asking for clarity about some of the options. Should be updated by end of month.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/uplink-messages-not-arriving-anymore/48696)._