# What is the difference between arduino uno and The Things uno

**URL:** <https://www.thethingsnetwork.org/forum/t/what-is-the-difference-between-arduino-uno-and-the-things-uno/5338>\
**Category:** Hardware\
**Created:** [February 10, 2017, 6:31pm UTC](https://www.thethingsnetwork.org/forum/t/what-is-the-difference-between-arduino-uno-and-the-things-uno/5338 "2017-02-10T18:31:43Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![arjanvanb](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/arjanvanb/32/46626_2.png) [@arjanvanb](https://www.thethingsnetwork.org/forum/u/arjanvanb)\
**Post date:** [February 12, 2017, 1:20pm UTC](https://www.thethingsnetwork.org/forum/t/what-is-the-difference-between-arduino-uno-and-the-things-uno/5338/13 "2017-02-12T13:20:11Z")

</div>

> [@BoRRoZ](#):
>
> the deepsleep code will not compile on other boards then the leonardo

Maybe _“not on other boards than those using an ATmega32u4”_?

For example the [LilyPad Arduino USB](https://www.arduino.cc/en/Main/ArduinoBoardLilyPadUSB) uses that MCU too. And, for example, Badgerboard tells one to select that LilyPad Arduino USB board in the IDE, for which the TTN library [**compiles** fine then](https://www.thethingsnetwork.org/forum/t/getting-badgerboard-to-work-with-ttn/5224). I don’t know if it fully works as expected; that’s a bit hard to tell with the little documentation Badgerboard provides.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/what-is-the-difference-between-arduino-uno-and-the-things-uno/5338)._