# Where can I find my node data (part 2)

**URL:** <https://www.thethingsnetwork.org/forum/t/where-can-i-find-my-node-data-part-2/2486>\
**Category:** Gateways\
**Created:** [June 16, 2016, 8:23pm UTC](https://www.thethingsnetwork.org/forum/t/where-can-i-find-my-node-data-part-2/2486 "2016-06-16T20:23:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jbeemster](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jbeemster/32/34786_2.png) [@jbeemster](https://www.thethingsnetwork.org/forum/u/jbeemster)\
**Post date:** [June 16, 2016, 8:23pm UTC](https://www.thethingsnetwork.org/forum/t/where-can-i-find-my-node-data-part-2/2486/1 "2016-06-16T20:23:23Z")

</div>

Hi guys and girls.  
Last week I was able to setup my ESP8266 to send data to the TTN by using the standard “network session key” and " application session key". The data is going fine in the direction of. [https://thethingsnetwork.org/api/v0/nodes/xxxxxx](https://thethingsnetwork.org/api/v0/nodes/xxxxxx)  
I see a lot of data.  
I moved over to my own environment using ttnctl. I can see data comming in.  
But only one message. The frames up I have to reset to be able to receive the next message. I already added the flag " relax-fcnt" to my node.

I know my problem is explained right here:  
[http://staging.thethingsnetwork.org/wiki/LoRaWAN/Security#security-in-lorawan-and-ttn\_frame-counters](http://staging.thethingsnetwork.org/wiki/LoRaWAN/Security#security-in-lorawan-and-ttn_frame-counters)

But I cannot find the solution. Which field ( assume field tmst) is not correctly?  
Here is my data that I have send.  
{“stat”:{“time”:“2016-06-16 19:54:57 CDT”,“lati”:0.0,“long”:0.0,“alti”:0,“rxnb”:296,“rxok”:296,“rxfw”:0,“ackr”:0.0,“dwnb”:0,“txnb”:0,“pfrm”:“ESP8266 1ChannelGateway”,“mail”:“jbeemster@quicknet.nl”,“desc”:“Arduino Based ESP8266 gateway Jeroen Beemster”}}  
{“rxpk”:[{“tmst”:2547361648,“chan”:0,“rfch”:295,“freq”:868.100000,“stat”:1,“modu”:“LORA”,“datr”:“SF7BW125”,“codr”:“4/5”,“lsnr”:10,“rssi”:-38,“size”:31,“data”:“QK7SvYKAAAABJrRjlqbPpgJIAiyx6eIG7RqqgAOfZA==”}]}  
{“rxpk”:[{“tmst”:3450412648,“chan”:0,“rfch”:296,“freq”:868.100000,“stat”:1,“modu”:“LORA”,“datr”:“SF7BW125”,“codr”:“4/5”,“lsnr”:10,“rssi”:-38,“size”:31,“data”:“QK7SvYKAAAABJrRjlqbPpgJIAiyx6eIG7RqqgAOfZA==”}]}

Looking forward to hear from you specialists.  
BTW: I have setup Node-red. I am connected but do not see any data coming in (even not the first message). But I think that will be a topic of “part 3” .

---

<div class="post-metadata">

**Author:** ![arjanvanb](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/arjanvanb/32/46626_2.png) [@arjanvanb](https://www.thethingsnetwork.org/forum/u/arjanvanb)\
**Post date:** [June 17, 2016, 6:51am UTC](https://www.thethingsnetwork.org/forum/t/where-can-i-find-my-node-data-part-2/2486/2 "2016-06-17T06:51:03Z")

</div>

As `data` is exactly the same in both messages, it seems the node is not incrementing the frame counter at all. So, for TTN these messages are exactly the same, and only the first will be processed.

---

<div class="post-metadata">

**Author:** ![jbeemster](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jbeemster/32/34786_2.png) [@jbeemster](https://www.thethingsnetwork.org/forum/u/jbeemster)\
**Post date:** [June 17, 2016, 10:23pm UTC](https://www.thethingsnetwork.org/forum/t/where-can-i-find-my-node-data-part-2/2486/3 "2016-06-17T22:23:56Z")

</div>

Thanks. I found the error. the field data was not updated.