INFO Starting concentrator...                 DateTime=2019-12-21 02:13:17.727598252 +0100 CET m=+2.216619138
lgw_connect:524: INFO: no FPGA detected or version not supported (v103)
Note: success connecting the concentrator
setup_sx125x:495: Note: SX125x #0 version register returned 0x00
setup_sx125x:503: Note: SX125x #0 clock output disabled
setup_sx125x:557: Note: SX125x #0 PLL start (attempt 1)
setup_sx125x:557: Note: SX125x #0 PLL start (attempt 2)
setup_sx125x:557: Note: SX125x #0 PLL start (attempt 3)
setup_sx125x:557: Note: SX125x #0 PLL start (attempt 4)
setup_sx125x:557: Note: SX125x #0 PLL start (attempt 5)
ERROR: FAIL TO LOCK PLL
setup_sx125x:495: Note: SX125x #1 version register returned 0x00
setup_sx125x:500: Note: SX125x #1 clock output enabled
setup_sx125x:557: Note: SX125x #1 PLL start (attempt 1)
setup_sx125x:557: Note: SX125x #1 PLL start (attempt 2)
setup_sx125x:557: Note: SX125x #1 PLL start (attempt 3)
setup_sx125x:557: Note: SX125x #1 PLL start (attempt 4)
setup_sx125x:557: Note: SX125x #1 PLL start (attempt 5)
ERROR: FAIL TO LOCK PLL
ERROR: Version of calibration firmware not expected, actual:145 expected:2
lgw_start:736: Note: calibration started (time: 2300 ms)
lgw_start:754: ERROR: CALIBRATION FAILURE (STATUS = 0)
WARNING: calibration could not access radio A
WARNING: calibration could not access radio B
WARNING: problem in calibration of radio A for image rejection
WARNING: problem in calibration of radio B for image rejection
WARNING: problem in calibration of radio A for TX imbalance
lgw_start:904: ERROR: Version of AGC firmware not expected, actual:145 expected:4
lgw_start:911: ERROR: Version of arbiter firmware not expected, actual:67 expected:1
Info: Initialising AGC firmware...
lgw_start:920: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:933: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:958: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
lgw_start:969: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
Info: putting back original RADIO_SELECT value
lgw_start:981: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x00
  INFO Concentrator started, packets can now be received and sent DateTime=2019-12-21 02:13:22.597316426 +0100 CET m=+7.086337366
  INFO Waiting for downlink messages           
  INFO Waiting for uplink packets              
  INFO Sending status to the network server     Altitude=0 CpuPercentage=49.280327 FrequencyPlan=EU_863_870 Latitude=0 Load1=6.48 Load15=3.97 Load5=5.31 Longitude=0 MemoryPercentage=79.07867 RTT=41 RXPacketsReceived=0 RXPacketsValid=0 TXPacketsReceived=0 TXPacketsValid=0 Uptime=0s
  INFO Sending status to the network server     Altitude=0 CpuPercentage=49.28451 FrequencyPlan=EU_863_870 Latitude=0 Load1=5.81 Load15=3.96 Load5=5.22 Longitude=0 MemoryPercentage=79.27259 RTT=44 RXPacketsReceived=0 RXPacketsValid=0 TXPacketsReceived=0 TXPacketsValid=0 Uptime=0s