Home Labs Stories LoRaWan GPS tracker

LORAWAN GPS TRACKER

image story

ABOUT THIS STORY


Posted on Dec. 30, 2017



Intermediate
1 Week

Introduction


This LoRaWan GPS tracker uses the TTN Cayenne integration and shows your movements on a map in your Cayenne dashboard.
Built in a 3D printed enclosure, fastened with a rubberband on my front bicycle light, I did several bike tours around our city. This setup was 1 meter above the ground and the antenna was almost horizontal. I was amazed by the good results for about.... $20

The GPS tracker is built up with the following hardware components:


* Arduino Pro Mini


* RFM95 tranceiver


* Ublox NEO-6M GPS


* Lipo battery


* On/Off switch


* 3D printed enclosure