SenseCAP LoRaWAN Soil Moisture and Temperature Sensor

With a built-in wireless LoRa module, SenseCAP Soil Moisture and Temperature Sensor transmits the collected soil M&T data to the base station and then to the server. Built on the high-quality German chip, this sensor integrates soil temperature with humidity, featuring high precision, high sensitivity. The measurement results are consistent, hardly affected by soil properties, making it widely applicable in industrial scenarios such as water-saving irrigation, weather station and greenhouse etc.

• Soil TemperatureRange: -30 °C to +70 °CAccuracy: ±0.2 °CResolution: 0.01 °C
• Soil MoistureRange: From completely dry to fully saturated (from 0% to 100% of saturation)Accuracy: ±2% ( 0 to 50 %(m3/m3) )Resolution: 0.01 %(m3/m3)
• Microcontroller: Ultra-low-power MCU
• Support Protocol: Based on LoRaWAN v1.0.2 protocol
• LoRa Channel Plan: CN470 / EU868 / US915
• LoRa Power Output: 16 dBm (EIRP)
• Sensitivity: 470MHz: -140dBm(SF12, BW125KHz); 868MHz: -137.5dBm(SF12, BW125KHz); 915MHz: -136.5dBm(SF12, BW125KHz);
• Current Consumption: 5 μA (sleep mode);120 mA (active mode)
• Communication Distance: 2 to 10 km (depending on different antennas and environments)
• Measuring Area: A cylinder area (with the probe as the center, diameter: 7cm, height: 7cm)

• Certifications: LoRaWAN Certified
• IP Rating: IP66
• UV Resistance: anti-aging (from rain/sun exposure): UL746C F1
• Battery Life: ≥ 3 years (upload data once per hour)
• Battery Voltage: 3.6V
• Battery Capacity: 19Ah (Non-rechargeable)
• Enclosure Material: PC
• Operating Temperature: -30 °C to +70 °C
• Operating Humidity: 0 to 100 %RH (non-condensing)
• Device Weight: 415g