For those who received their Badgerboard last week: the hardware seems nice, but its Arduino library seems to be in some beta state (if only given the many commented/disabled lines of code), for which nothing really changed since December 13th. I wonder if their frequency plan is set up correctly. …

[image] Geab: we recommend to replace with Badgerboard lib https//github.com/nasys/badgerboard (HW reasons) Anything more specific than just “hardware reasons”? Looking at the current state of their software and the lack of any documentation, I’d stick with the TTN software. Also, they respo…

I asked them to comment here - I am pretty new to LORA and need to understand how to :slight_smile:Your post is highly appreciated - will try to follow when I have time

Just noticed that for “low” temperatures (say 10 ºC, not really low) the FaBo library or the HTS221 sensors report values such as 1212.51 ºC. These are then sent as negative values, due to the integer 121251 exceeding the maximum value for 2 byte signed integers, which have a range of −32,768 to 32…

Our apologies for extremely delayed schemetic update, but it will be up for everyone in next week for sure! The hardware wiring is documented in here: http://badgerboard.io/wp-content/uploads/2016/11/badgerboard_pinout.pdf

That’s good news, @anni . For the wiring I meant to refer to internal wiring, such as wiring from MCU to RN2438, the sensor, the LiPo charger and all. That would allow people to figure out if something special is needed for the software. However, if the schematics are provided then that is surely cov…

Hi! I have trying to connect my badgerboard with the bagerboard library with ABP and have no success. Im using the standard library for bagerboard and Lora_temp_hum_ABP.ino. It’s compiling but I get some error when trying to send “Bootmsg”. I have used the debug and this is what I get. Configured…

Hi everyone, you can find the schematics from github: https://github.com/nasys/badgerboard/tree/master/schematics

I just saw that you have uploaded the schematics. How do I open it? I’ve tried open the .sch with KiCad without success. Isn’t it easier to just upload a PDF or something also ? Or can you recommend any freeware to open the schematics with ? Regards NoX

Hi @nox1989 , the PDF file will be up soon as well, meanwhile you should be able to get PNG & SVG from https://schematics.io

Here is the PDF file: BB-M-1_0.pdf (163.7 KB)

Learn

Hardware

Device Repository The Things Shop

Forum Community Conference Enterprise

Need professional support?

The Things Network

Getting Badgerboard to work with TTN

End Devices (Nodes)

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled