For gps dragino/lora end device I am following this link https://www.instructables.com/Use-Lora-Shield-and-RPi-to-Build-a-LoRaWAN-Gateway/ and for lora packet forwarder I am using this stack https://github.com/Lora-net/sx1302_hal.git . I have edited global_conf.json
Blockquote “gateway_conf”: {
“gateway_ID”: “E45F01FFFE72D148”,
/* change with default server address/ports /
“server_address”: “eu1.cloud.thethings.network”,
“serv_port_up”: 1700,
“serv_port_down”: 1700,
/ adjust the following parameters for your network /
“keepalive_interval”: 10,
“stat_interval”: 30,
“push_timeout_ms”: 100,
/ forward only valid packets /
“forward_crc_valid”: true,
“forward_crc_error”: false,
“forward_crc_disabled”: false,
/ GPS configuration /
“gps_tty_path”: “/dev/ttyS0”,
/ GPS reference coordinates /
“ref_latitude”: 0.0,
“ref_longitude”: 0.0,
“ref_altitude”: 0,
/ Beaconing parameters */
“beacon_period”: 0,
“beacon_freq_hz”: 869525000,
“beacon_datarate”: 8,
“beacon_bw_hz”: 125000,
“beacon_power”: 14,
“beacon_infodesc”: 0
},
My packet forwarder is working absolutely fine. And I am getting logs of gateway connection.
But my end device can not connect with that. So I am not getting logs of dragino lora/gps end device logs. Although I am getting EV_TXCOMPLETE status.