Lorix One connect, but shown as 'not connected' (solved)

End Devices (Nodes)
1

I set up and configured a LorixOne gateway and when invoking the poly_pkt_fwd from the command line with sudo everything looks nice and dandy. It seems to have good contact to the router.eu.thethings.network server. But in the console it is shown as ‘not connected’. I have no idea what is going wrong.

##### 2019-04-15 17:31:01 GMT #####
### [UPSTREAM] ###
# RF packets received by concentrator: 0
# CRC_OK: 0.00%, CRC_FAIL: 0.00%, NO_CRC: 0.00%
# RF packets forwarded: 0 (0 bytes)
# PUSH_DATA datagrams sent: 1 (242 bytes)
# PUSH_DATA acknowledged: 100.00%
### [DOWNSTREAM] ###
# PULL_DATA sent: 3 (100.00% acknowledged)
# PULL_RESP(onse) datagrams received: 0 (0 bytes)
# RF packets sent to concentrator: 0 (0 bytes)
# TX errors: 0
### [GPS] ###
# GPS sync is disabled
##### END #####
INFO: [up] PUSH_ACK for server router.eu.thethings.network received in 47 ms
INFO: [down] for server router.eu.thethings.network PULL_ACK received in 35 ms

local_conf.json here: https://0bin.net/paste/uWUPqvv0BX8hNuhk#P0-8EuFZsmMNpe71T1tPCnUwXOJePZsrkjvjmJk8X6V

Any help appreciated.

2

Problem solved. In the TTN console when configuring the gateway the checkbox for using the legacy forwarder has to be ticked.

1 Like