Gateway for Mexico City


#1

We are looking for a gateway to bring TTN to Mexico, Please
help us to choose the correct gateway !


(Ruud Vlaming) #2

There is not such thing as the ‘correct gateway’, it depends on your needs and wishes, and your budget of course. Please see here http://thethingsnetwork.org/wiki/Hardware/OverviewGateways for an overview.

If you can further specify your wishes, i can help you make the right choice.


#3

hi, we look that hardware:

http://www.multitech.com/models/94557202LF

http://www.multitech.com/models/99999107LF


(Tom Oostvogels) #4

Dear @GrupoNeoHQ, thank you for your post!

@devlaam I think they have determined the multitech best suits their needs and budget, and the biggest question is: can they start working with only the first, or do they need the second to get connected?


(Ruud Vlaming) #5

Ah, now i understand the question. The first is not enough, it is just the (required!) host. To build a gateway with that you need the second also, or at least the lora receiver component of it: http://www.multitech.com/models/94557300LF. Whatever you order (complete kit or just the module) make sure you have the correct frequency. Mexico, Region2m thus most likely: 915MHz, but could not definitive conformation, see http://www.moc.gov.il/sip_storage/files/7/3177.pdf for an overview.


#6

Dear @devlaam

Thanks for your comment and support, we’re to order the complete kit and the antennas to, we’re not sure about the frequency, we going to get the 100% secure about the frequency as soon as possible. It’s there anything else to deploy the gateway talkin about hardware?


(Ruud Vlaming) #7

I think this is pretty complete, i think. For further information have a look at this thread: Setting up Multitech Conduit Gateway for TTN


#8

its the same hadware i hting, we need to review the antenas too.


#9

Hi we look this another gateway http://www.link-labs.com/symphony-gateway/
what do you think ?