i just tested and the problem is not in the code !
i use http integration and now it is webhooks, but it is as webhooks don’t call my php file, i tested !!
and now i have a new problem :
All was ok since a few hours, but this morning, gateway receive end device information but application not receive ! all is same,I was sleeping and I didn’t touch anything
*************************************************************/
// LoRaWAN NwkSKey, network session key
// This is the default Semtech key, which is used by the early prototype TTN
// network.
static const uint8_t PROGMEM NWKSKEY[16] = { xxxxxxxxxxxxxxxxx}; // Modifier les valeurs en fonction des infos de TTN
// LoRaWAN AppSKey, application session key
// This is the default Semtech key, which is used by the early prototype TTN
// network.
static const uint8_t PROGMEM APPSKEY[16] = { xxxxxxxxxxxxxxxxxxx }; // Modifier les valeurs en fonction des infos de TTN
// LoRaWAN end-device address (DevAddr)
static const uint32_t DEVADDR = 0xxxxxxx; // Modifier les valeurs en fonction des infos de TTN
@descartes Nick, This looks ancient! Johan and team have been telling people to not use the default Semtech keys (big security headache) for at least 4 if not 5+ years - suspect this goes back to the early original Semtech Neuchatel/Grenoble/IBM Zurich LMIC early releases (note French comments embedded) used when TTN started in 2015! Think I still have an old SX1301 demo system (closed/private test network) that had those embedded…
ok, so i must to look for a new arduino script. I am not good in english and i don’t find any script that i can adapt to my need
i am only a beekeeper and not a professional from lora
i use a new arduino code OTAA
My device send “joining”, i see on gateway but joining and no repsonse from ttn
I am lost, I no longer have any information from my hives and it is the most important time of the year. Thanks for your help
Which code? Do you mean Arduino library? If so, name & version?
Or do you mean the EUI’s & AppKey?
What made you change from a working v2 setup?
Which gateway do you have (brand, model, version)?
Did you take a device being used on a hive and try and change it for v3?