Hi cslorabox - Thankyou so much for your advice. I’m out of the office for the next couple of days but I’ll be sure to try your tips later in the week. I was not aware that having a node too close to a Gateway is known to result in unreliable communication. Great Tip!
I have the same loop with a browan door sensor I migrated from v2 to v3. It wants to join, but there is no success.
1 Like
I have encountered the same issue.
In V2 console, the US915, EU868 and CN470 work well. But in V3 console, US915 and EU868 work well, only CN470 encounter this issue. Does anyone provide the suggestion?
I have the same problem with v3 and lansitec devices, using the frequency of AU915 FSB_2.
I found that some of my OTAA devices on AU915 that had been working with MAC 1.02 REV A in TTN V2 would not join in V3. The solution was to set them up as MAC 1.02 REV B in the V3 console.
Good morning,
Is there any one who could solve the mentioned problem. It made me disappointed. I see always forward join accept message. Would you please help me?
1- more or less from december 2021 we have this problem
2- I reset the devEUI and all other parameters in lorawan node
3- I tried ABP
Many thanks,
- is roughly at the time there was a change for the V2 gateways. Is your node able to receive the downlink join-accept?
Sorry, can’t read the small text in this screen shot. For text cut-and-paste it to a message (use </> to format), don’t use pictures.
1 Like
imho the firmware version of your LSE01 is rather old. I would recommend an update to 1.1.4 first.
1 Like
Thanks, but As @wolfp said I upgraded the firmware to the latest possible version (1.1.1 as it is a LSE01 sensor we bought it in 2020 and its main-board doesn't support version 1.1.4 as I tried it too). But problem didn't solved.
Its also possible to hold ctrl+move mouse scroll to maximize web page. I tried to do as you said, Please let me know the screenshot is visible.
The second screen shot is clearly some text that if you can’t copy & paste off the CuteCom screen, you could copy & paste out of the cutecom.log.
The primary reason for getting text formatted with </> is that we need to see the serial log for the device for the loop - neither screen shot shows any form of loop.
1 Like
[18:11:40:849] AT+MODEL=LSE01
[18:11:40:865] AT+DEUI=70 b3 d5 7e d0 04 db bd
[18:11:40:898] AT+DADDR=26 0b 96 8c
[18:11:40:924] AT+APPKEY=03 2b 60 27 d7 fc 03 a9 89 ed 9f 67 b7 cb 37 99
[18:11:40:984] AT+NWKSKEY=59 0f 6f 82 d1 9b d2 3c 46 b7 55 5c b3 7f 29 5e
[18:11:41:047] AT+APPSKEY=40 99 ed 17 af 3b 62 1f ef 2f 8d 71 ea 88 fe ea
[18:11:41:110] AT+APPEUI=70 b3 d5 7e d0 03 92 fd
[18:11:41:147] AT+ADR=1
[18:11:41:156] AT+TXP=0
[18:11:41:168] AT+DR=3
[18:11:41:176] AT+DCS=0
[18:11:41:187] AT+PNM=1
[18:11:41:198] AT+RX2FQ=869525000
[18:11:41:220] AT+RX2DR=0
[18:11:41:233] AT+RX1DL=1000
[18:11:41:248] AT+RX2DL=2000
[18:11:41:263] AT+JN1DL=5000
[18:11:41:279] AT+JN2DL=6000
[18:11:41:294] AT+NJM=1
[18:11:41:305] AT+NWKID=00 00 00 00
[18:11:41:327] AT+FCU=0
[18:11:41:338] AT+FCD=0
[18:11:41:348] AT+CLASS=A
[18:11:41:361] AT+NJS=0
[18:11:41:372] AT+RECVB=0:
[18:11:41:385] AT+RECV=0:
[18:11:41:398] AT+RJTDC=20
[18:11:41:413] AT+RPL=0
[18:11:41:424] AT+VER=v1.1.1 EU868
[18:11:41:445] AT+CFM=0
[18:11:41:460] AT+CFS=0
[18:11:41:464] AT+SNR=0
[18:11:41:476] AT+RSSI=0
[18:11:41:489] AT+TDC=1200000
[18:11:41:505] AT+PORT=2
[18:11:41:515] AT+RX1WTO=9
[18:11:41:529] AT+RX2WTO=6
[18:11:41:542] AT+MOD=1
[18:11:41:553] AT+INTMOD=2
[18:11:41:566] AT+5VT=0
[18:11:41:578] AT+CHS=0
[18:11:41:588] AT+DDEBUG=0
[18:11:41:602] AT+FRE=1
[18:11:42:418]
[18:11:42:427] Start Tx events
[18:11:42:446]
[18:11:42:446] OK
[18:11:58:673]
[18:11:58:677] ***** UpLinkCounter= 0 *****
[18:11:58:709] TX on freq 868.500 MHz at DR 3
[18:11:58:882] txDone
[18:12:03:879] RX on freq 868.500 MHz at DR 3
[18:12:03:917] rxTimeOut
[18:12:04:914] RX on freq 869.525 MHz at DR 0
[18:12:05:112] rxTimeOut
[18:12:19:310]
[18:12:19:316] ***** UpLinkCounter= 0 *****
[18:12:19:346] TX on freq 868.300 MHz at DR 2
[18:12:19:684] txDone
[18:12:24:688] RX on freq 868.300 MHz at DR 2
[18:12:25:147] rxDone
[18:12:25:158] Rssi= -51
[18:12:25:170] JOINED
[18:12:25:177]
[18:12:25:181] Join Accept:
[18:12:25:194] Rx1DrOffset:0
[18:12:25:210] Rx2Datarate:0
[18:12:25:226] ReceiveDelay1:5000 ms
[18:12:25:251] ReceiveDelay2:6000 ms
[18:12:26:824] Hardware version:LSN50 V2.0
[18:12:27:659] LSE01 LoRaWAN Soil Moisture & EC Sensor
[18:12:27:704] Image Version: v1.1.1
[18:12:27:727] LoRaWan Stack: DR-LWS-005
[18:12:27:756] Frequency Band: EU868
[18:12:27:779] DevEui= 70 B3 D5 7E D0 04 DB BD
[18:12:27:814]
[18:12:27:818] Please use AT+DEBUG to see debug info
[18:12:27:859]
[18:12:27:859] ***** UpLinkCounter= 0 *****
[18:12:27:892] TX on freq 868.300 MHz at DR 5
[18:12:27:927] txDone
[18:12:32:801] RX on freq 868.300 MHz at DR 5
[18:12:32:888] rxDone
[18:12:32:899] Rssi= -51
[18:12:32:911] JOINED
[18:12:32:920]
[18:12:32:920] Join Accept:
[18:12:32:936] Rx1DrOffset:0
[18:12:32:949] Rx2Datarate:0
[18:12:32:967] ReceiveDelay1:5000 ms
[18:12:32:990] ReceiveDelay2:6000 ms
[18:13:04:485] Hardware version:LSN50 V2.0
[18:13:05:320] LSE01 LoRaWAN Soil Moisture & EC Sensor
[18:13:05:364] Image Version: v1.1.1
[18:13:05:388] LoRaWan Stack: DR-LWS-005
[18:13:05:418] Frequency Band: EU868
[18:13:05:439] DevEui= 70 B3 D5 7E D0 04 DB BD
[18:13:05:475]
[18:13:05:478] Please use AT+DEBUG to see debug info
[18:13:05:520]
[18:13:05:520] ***** UpLinkCounter= 0 *****
[18:13:05:553] TX on freq 868.500 MHz at DR 5
[18:13:05:584] txDone
[18:13:10:462] RX on freq 868.500 MHz at DR 5
[18:13:10:549] rxDone
[18:13:10:559] Rssi= -53
[18:13:10:573] JOINED
[18:13:10:580]
[18:13:10:580] Join Accept:
[18:13:10:597] Rx1DrOffset:0
[18:13:10:611] Rx2Datarate:0
[18:13:10:627] ReceiveDelay1:5000 ms
[18:13:10:653] ReceiveDelay2:6000 ms
[18:13:42:108] Hardware version:LSN50 V2.0
[18:13:42:943] LSE01 LoRaWAN Soil Moisture & EC Sensor
[18:13:42:986] Image Version: v1.1.1
[18:13:43:011] LoRaWan Stack: DR-LWS-005
[18:13:43:038] Frequency Band: EU868
[18:13:43:063] DevEui= 70 B3 D5 7E D0 04 DB BD
[18:13:43:097]
[18:13:43:102] Please use AT+DEBUG to see debug info
[18:13:43:141]
[18:13:43:144] ***** UpLinkCounter= 0 *****
[18:13:43:174] TX on freq 868.500 MHz at DR 5
[18:13:43:209] txDone
[18:13:48:086] RX on freq 868.500 MHz at DR 5
[18:13:48:172] rxDone
[18:13:48:185] Rssi= -53
[18:13:48:195] JOINED
[18:13:48:203]
[18:13:48:203] Join Accept:
[18:13:48:219] Rx1DrOffset:0
[18:13:48:235] Rx2Datarate:0
[18:13:48:251] ReceiveDelay1:5000 ms
[18:13:48:274] ReceiveDelay2:6000 ms
[18:14:19:738] Hardware version:LSN50 V2.0
[18:14:20:573] LSE01 LoRaWAN Soil Moisture & EC Sensor
[18:14:20:619] Image Version: v1.1.1
[18:14:20:642] LoRaWan Stack: DR-LWS-005
[18:14:20:670] Frequency Band: EU868
[18:14:20:693] DevEui= 70 B3 D5 7E D0 04 DB BD
[18:14:20:727]
[18:14:20:732] Please use AT+DEBUG to see debug info
[18:14:20:772]
[18:14:20:772] ***** UpLinkCounter= 0 *****
[18:14:20:807] TX on freq 868.300 MHz at DR 5
[18:14:20:839] txDone
[18:14:25:715] RX on freq 868.300 MHz at DR 5
[18:14:25:802] rxDone
[18:14:25:813] Rssi= -53
[18:14:25:825] JOINED
[18:14:25:833]
[18:14:25:833] Join Accept:
[18:14:25:850] Rx1DrOffset:0
[18:14:25:865] Rx2Datarate:0
[18:14:25:883] ReceiveDelay1:5000 ms
[18:14:25:905] ReceiveDelay2:6000 ms
[18:14:57:388] Hardware version:LSN50 V2.0
[18:14:58:223] LSE01 LoRaWAN Soil Moisture & EC Sensor
[18:14:58:268] Image Version: v1.1.1
[18:14:58:291] LoRaWan Stack: DR-LWS-005
[18:14:58:320] Frequency Band: EU868
[18:14:58:342] DevEui= 70 B3 D5 7E D0 04 DB BD
[18:14:58:377]
[18:14:58:381] Please use AT+DEBUG to see debug info
[18:14:58:422]
[18:14:58:422] ***** UpLinkCounter= 0 *****
[18:14:58:454] TX on freq 868.100 MHz at DR 5
[18:14:58:491] txDone
[18:15:03:365] RX on freq 868.100 MHz at DR 5
[18:15:03:452] rxDone
[18:15:03:462] Rssi= -51
[18:15:03:474] JOINED
[18:15:03:484]
[18:15:03:484] Join Accept:
[18:15:03:499] Rx1DrOffset:0
[18:15:03:515] Rx2Datarate:0
[18:15:03:530] ReceiveDelay1:5000 ms
[18:15:03:555] ReceiveDelay2:6000 ms
[18:15:34:957] Hardware version:LSN50 V2.0
[18:15:35:792] LSE01 LoRaWAN Soil Moisture & EC Sensor
[18:15:35:836] Image Version: v1.1.1
[18:15:35:859] LoRaWan Stack: DR-LWS-005
[18:15:35:889] Frequency Band: EU868
[18:15:35:912] DevEui= 70 B3 D5 7E D0 04 DB BD
[18:15:35:947]
[18:15:35:951] Please use AT+DEBUG to see debug info
[18:15:35:991]
[18:15:35:991] ***** UpLinkCounter= 0 *****
[18:15:36:025] TX on freq 868.100 MHz at DR 5
[18:15:36:058] txDone
[18:15:40:934] RX on freq 868.100 MHz at DR 5
[18:15:41:021] rxDone
[18:15:41:032] Rssi= -50
[18:15:41:043] JOINED
[18:15:41:052]
[18:15:41:052] Join Accept:
[18:15:41:068] Rx1DrOffset:0
[18:15:41:085] Rx2Datarate:0
[18:15:41:100] ReceiveDelay1:5000 ms
[18:15:41:124] ReceiveDelay2:6000 ms
[18:16:12:513] Hardware version:LSN50 V2.0
[18:16:13:348] LSE01 LoRaWAN Soil Moisture & EC Sensor
[18:16:13:391] Image Version: v1.1.1
[18:16:13:417] LoRaWan Stack: DR-LWS-005
[18:16:13:443] Frequency Band: EU868
[18:16:13:468] DevEui= 70 B3 D5 7E D0 04 DB BD
[18:16:13:503]
[18:16:13:508] Please use AT+DEBUG to see debug info
[18:16:13:547]
[18:16:13:547] ***** UpLinkCounter= 0 *****
[18:16:13:581] TX on freq 868.500 MHz at DR 5
[18:16:13:614] txDone
[18:16:18:490] RX on freq 868.500 MHz at DR 5
[18:16:18:577] rxDone
[18:16:18:588] Rssi= -50
[18:16:18:600] JOINED
[18:16:18:608]
[18:16:18:608] Join Accept:
[18:16:18:624] Rx1DrOffset:0
[18:16:18:640] Rx2Datarate:0
[18:16:18:656] ReceiveDelay1:5000 ms
[18:16:18:680] ReceiveDelay2:6000 ms
[18:16:50:113] Hardware version:LSN50 V2.0
[18:16:50:948] LSE01 LoRaWAN Soil Moisture & EC Sensor
[18:16:50:994] Image Version: v1.1.1
[18:16:51:019] LoRaWan Stack: DR-LWS-005
[18:16:51:046] Frequency Band: EU868
[18:16:51:070] DevEui= 70 B3 D5 7E D0 04 DB BD
[18:16:51:104]
[18:16:51:104] Please use AT+DEBUG to see debug info
[18:16:51:148]
[18:16:51:148] ***** UpLinkCounter= 0 *****
[18:16:51:179] TX on freq 868.500 MHz at DR 5
[18:16:51:216] txDone
[18:16:56:091] RX on freq 868.500 MHz at DR 5
[18:16:56:177] rxDone
[18:16:56:190] Rssi= -51
[18:16:56:201] JOINED
[18:16:56:208]
[18:16:56:208] Join Accept:
[18:16:56:224] Rx1DrOffset:0
[18:16:56:240] Rx2Datarate:0
[18:16:56:255] ReceiveDelay1:5000 ms
[18:16:56:279] ReceiveDelay2:6000 ms
[18:17:02:565] HEX:fe 03 06 00 00 0a 0d 00 00 f6 9a
[18:17:02:610] water_soil:0.00
[18:17:02:626] temp_soil:25.73
[18:17:02:644] conduct_soil:0
[18:17:02:660]
[18:17:02:660] ***** UpLinkCounter= 0 *****
[18:17:02:693] TX on freq 868.300 MHz at DR 0
[18:17:04:056] txDone
[18:17:09:087] RX on freq 868.300 MHz at DR 0
[18:17:10:405]
[18:17:10:408] Received: ADR Message
[18:17:10:434]
[18:17:10:434] rxDone
[18:17:10:443] Rssi= -54
Looks like the module is rebooting after it received the join accept message. Have you read chapter 5.3 of the manual and implemented the mentioned fix?
So grateful Kersing, Yes It seems it works with your last guide, I monitor LSE01 for some days to see completely solved.
In appreciation.
Good luck.
Good morning,
It work properly, But I didn’t understand why it happened roughly at the time there was a change for the V2 gateways?
Thanks,
There wasn’t a change to any configurations - the console was closed - my last v2 gateway is still running fine.
Good afternoon,
My problem solved with bypassing fuse. But I didn’t understand why it happened roughly at the time there was a change for the V2 gateways as you mentioned?
Thanks,
Are you asking if the change of servers somehow managed to influence the fuse in your device?