If trying MAC be sure to use Enet vs WiFi MAC and only last 3 Byte Pairs (Last 6 digits), also try to log onto its DHCP aquired IP address directly if it has taken one from the local network? If Reset then perhaps log on using WiFi quick config mode to default WiFi AP of 192.168.1.1? (I often just access using Phone or iPad this way).
Have updated Topic Title as no longer āNewā! - A well established workhorse GW, that has undergone several firmware updates, and has been in the market for 2.5 nearly 3 years now 
(I use several as do a number of clients and associates and fellow community contributors)
1 Like
I use de only last 3 byte pairs of the ethernet mac and still not giving me access.
Can you try over WiFi as above?
Do you have admin access to network to check if it is perhaps picking up a DHCP assigned IP address?
Also try power off and retry factory reset as may have fallen into intermediate state?!
NOTE: DO NOT JUST DELETE FROM TTN CONSOLE AT ANY POINT AS YOU MAY NOT BE ABLE TO RE-REGISTER GW ID 
1 Like
Solved, thank you every much
What was issue/solution for others reading later?
1 Like
Conection with wifi
Hi Guys, hope everything is ok and well.
I have been trying to get this unit online on the TTN console for almost 3 days without any luck.
I am using version Laird Linux gatwick-laird-93.9.6.30.
I tried using the preset and on the unit dashboard it showed connected but on the TTN console did not change even after several power cycles.
I tried to configure as a basic station but that didnāt do the trick.
I thought it could have been a old firmware but I updated the to last one and I am still without luck.
Can someone point me in the right direction?
How configured, which region/cluster? Which Server settings? What is GW ID? GW EUI? Freq plan?, Console settingsā¦ details details - we need info as crystal balls typically a bit misty this time of year 
! Is there an active device nearby sending data? What does TTN GW Console show?
Which one? Be sure targeting V3 not old revs using V2 etc.
Guys thanks for the replies, I was able to connected it! So it is showing online now! I just need it to replace the preset server with the current one! That did the trick!
Hi All,
Iāve run out of ideas on this one after RTFMāing my little heart out and following all of the guides. Iām failing to connect to TTN due to a certificate validity error (see below). Iāve logged a ticket with Sentrius as well, just thought I would ask here incase anyone knows a fixā¦ firmware version gatwick-laird-93.9.6.44
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | 2023-03-09 23:18:57.633 [TCE:INFO] INFOS reconnect backoff 80s (retry 1) |
|---|---|---|---|---|
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | 2023-03-09 23:18:57.627 [AIO:DEBU] [6] WS connection shutdownā¦ |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | 2023-03-09 23:18:57.627 [AIO:INFO] TLS server certificate verification failed: The certificate validity starts in the future |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | 2023-03-09 23:18:57.507 [AIO:XDEB] [6] ws_connecting state=1 |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | 2023-03-09 23:18:57.506 [AIO:XDEB] [6] ws_connecting state=1 |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | 2023-03-09 23:18:57.472 [AIO:XDEB] [6] ws_connecting state=1 |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | key usage : K |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | basic constraints : CA=true |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | RSA key size : 4096 bits |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | signed using : RSA with SHA-256 |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | expires on : 2035-06-04 11:04:38 |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | issued on : 2015-06-04 11:04:38 |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | subject name : C=US, O=Internet Security Research Group, CN=ISRG Root X1 |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | issuer name : C=US, O=Internet Security Research Group, CN=ISRG Root X1 |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | serial number : xxx |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | cert. version : 3 |
| RG1xx29DDFF | lora | user.notice | Mar 9 23:18:57 | 2023-03-09 23:18:57.433 [AIO:INFO] /opt/lora/basicstation/tc.trust: |
Thanksā¦
Solved it. For anyone who gets stuck with the same, I updated the firmware out of the box using this link -
https://connectivity-firmware.s3.amazonaws.com/rg1xx-lora-gateway/firmware/newest/fw.txt
Laird Linux gatwick-laird-93.9.6.44
to try and solve the problem I found a link to an old firmware -
https://connectivity-firmware.s3.amazonaws.com/rg1xx-lora-gateway/firmware/latest/fw.txt
Laird Linux gatwick-laird-93.7.2.10 (March 2018)
ā¦that didnāt work, but then I rolled forward again to the latest and the error went away.
Cheers
1 Like
Iād like to ask I got my Gateway and iām having problems connecting to the web interface via ethernet. Connecting through the wifi is working, however I cannot get the Gateway to connect to The Things Stack even though Iām following the steps given in their guide. Iāve tried updating the firmware, but that failed too.
Iāve tried connecting both my PC and Gateway to the router to try and access the interface through https://rg1xxMACID.local (where MACID is the last 6 characters of the gatewayās macid) but it wonāt work no matter what I did.
If on same router just go direct to the GWās IP address in your browser - I find that reliable.
Also I need to check but may be http vs https - long time since I tried that!
A .local address is reliant on random versions of mDNS / Bonjour - if you can tell us what OS & browser you are using on the PC I can comment appropriately.
If you donāt, Iāll comment in-appropriately.
PC is running on Windows 10 and the browser iām using is Chrome
iāve tried using the IP Address listed in the DHCP didnāt work either. When I ping it it says host is unreachable.
but i might try this tomorrow
Both wireline (recommended until you are fully up and running) or are you on wifi to/via router>