Multitech gateway downlink format

Gateways MultiTech Gateways
1

Hi, Iam looking on the downlink communication of gateway but the packet format i have is not right one .do i get the packet format for downlink communication. I attaching the text here

        pkt.invert_pol = invert_pol;
        pkt.preamble = preamble;
        pkt.no_header = no_header;
        pkt.payload[0] = 0x60; /* Confirmed Data Up */
        pkt.payload[1] = 0x26;
        pkt.payload[2] = 0x0D;
        pkt.payload[3] = 0xA0;
        pkt.payload[4] = 0xFE;
        pkt.payload[5] = 0x00; /* FCTrl */
        pkt.payload[6] = 0; /* FCnt */
        pkt.payload[7] = 0; /* FCnt */
        pkt.payload[8] = 0x02; /* FPort */
        for (i = 9; i < 255; i++) {
            pkt.payload[i] = i;
        }
2

Please do not double post - it splits volunteers attention and efforts and scatters information in a way that is less useful for those who look for similar answers later. Closing this thread, leaving other post open.

5

Re-opened as other post hijacked a thread with different subject matter not related.

6
1 Like
7

understood

8

You sure - it’s turning in to an edit-fest here.

I’ve put your code back so you can answer the question that is really rather pertinent to your question - where did that code from.

Going forward, please format text/code/JSON/logs with the </> tool