Yes, have been using Cayenne on other devices and also with the MicroChip LoRa Mote with no problems so at a basic level I get it. I just expected the Things Node to work without any fiddling It’s the fiddling bit I am not clear on.
I can see my Things Node in Cayenne, but all I see is RSSI and SNR and Location. None of sensors.
Thanks! I completely follow, but the only CayenneLPP file I have is at Examples->TheThingsNetwork->CayenneLPP
And it contains only this (below) … i.e. knows nothing about the Node I assume I need to weave the two files together (i.e. the CayenneLPP and Examples->TheThingsNode->Basic.
I am looking at CayenneLPP too, but I got a TTGO T3 V2.1_1.5. It is a ESP32 with Lora built in.
I am not sure what I need to change to make it work. The example code is compiling and running, but i think I need to add som more info to make the Lora part work?
In other code I need to map the pins like this:
// Pin mapping
const lmic_pinmap lmic_pins = {
.nss = 18,
.rxtx = LMIC_UNUSED_PIN,
.rst = 12,
.dio = {26, 33, 32},
};
I think maybe it is the Serial1 that need to be defined?
#define loraSerial Serial1
Any help will be good.
Regards
Svein Utne
The example code discussed in this topic is related to The Things Node and will only work with that device because of its onboard sensors.
If you want to have your device working on Cayenne to, make sure that it first works ‘normally’ with TTN, that it can join the network, and that it transmits regulary some sensor data.
Next step is to get that data to Cayenne.
Therefore you have to edit your code and set integration in your console.
Hi BoRRoZ, Thank you for your answer. I have already good connection to The Things Network, and can see the payload from the web, but Cayenne got more sexy display of data, so I am interested in finding a way to use Cayenne with my Lora data.
Some background info on Cayenne’s LPP (low power payload)
So basically, if you transmit your data in this format, have an account at Cayenne, have registered your device there, added TTN to Cayenne integration in your console, you’re more or less set and you have a dashboard .
Don’t know if there are complete examples (must be) for your device (what sensor(s) / what data ?)