Hello, I’m trying the Thing Stack on the localhost following this guide: https://www.thethingsindustries.com/docs/enterprise/docker/configuration/ . Things stack open-source on localhost Creating gateway works as expected. I’m using RakWireless USB Gateway device: wisgate-developer-base . [localho…

Issue resolved. This project : GitHub - xoseperez/the-things-stack-docker at b650dbf2673318c5e78d71b17a2a07ab50736e91 helped resolve the issue.

[image] dexterac: OTAA Accept join-request and Forward join-accept message runs in loop and doesn’t complete. RSSI values are about -40 and the device was more than 5meters away from gateway. The greater the distance the better and a brick wall - I would get the RSSI even more down than -40 t…

@dexterac Please don’t double post, posting as detailed as possible is better, than two post.

Hi @Johan_Scheepers In both the tests RSSI was in range of -45 to -40. While connecting to cloud TTN it worked without any issues. In the localhost setup I’m using docker image version 3.20.2-arm64. Certificates are created with cfssl and these files have permissions for user and group 886:886. (su…

[image] dexterac: In the localhost setup I’m using docker image version 3.20.2-arm64 You will need to investigate what went wrong with your local docker image.

Which container should I look for errors? While running docker-compose up these are the logs displayed on the console stack_1 | INFO Finished unary call {"duration": 0.02, "grpc.method": "HandleJoin", "grpc.service": "ttn.lorawan.v3.NsJs", "namespace": "grpc", "peer.address": "pipe", …

Forward join-accept message loop

Gateways RAK Gateways

Johan_Scheepers August 10, 2022, 6:06am 5

You will need to investigate what went wrong with your local docker image.