I gather not. Thanks for the help.
schematic, BOM and Gerber files for EU and US available
does someone konws where to buy these Semtech GW ?
“Picocell gateway is available through Tektelic, Laird, and Flex, according to Semtech.”
(I found this on a tweet a while back. Please add to the thread if you are able to make a successful purchase from any of the above. This will likely require phone/email inquiries.)
It doesn’t look like Laird has a SX1308-based gateway. I’ll send them a business mail, and we’ll see.
I also asked Tektelit for the datasheet of their pico gateway…
Well, some updates about my last SX1308-related endeavors:
- Laird got back to me, and they do NOT have any SX1308-based gateway project. They are focused on the RG1xx and it’s based on a SX1301
- I got the datasheet link for the Tektelit KonaEdge pico gateway. Sadly it doesn’t say what concentrator they use.
Thanks for the head up. Amazing we can’t get semtech gateway
picocell_gateway_user_guide.pdf link removed from semtech site
datasheet just updated, not removed
any news on this?
google gave me nothing interesting
LoRa-Based Picocell Gateway Dongle
The Semtech LoRa-based picocell gateway dongle can easily connect via a USB port to a Linux or Windows based processor, which are most commonly used by LoRaWAN gateway developers. The Windows GUI streamlines the network connection without an additional board. This tool is expected to accelerate adoption of IoT technology into next-generation smart applications. Beyond the initial prototype phase, several LoRa Alliance™ members offer compatible commercial, production-grade network servers and picocell gateway products. The device is currently available with Linux support, and Windows support will be available by early-2018.
Hi, does anyone have working link for downloading picogw UI for windows?
this link does not work for me.
Did someone here tried to compile picoGw?
I have few problems with it.
I can read chip ID but only every second time.
I can almost start packet forwarder (some time - mostly it just stops at beginning)
When it starts it reports
“failed to start concentrator”
where did you get your SX1308 based platform?
can you post a link for the shop?
I am using RAK831 and STM32F104 nucleo board
and here is my repo where STM can communicate with board, but I still have problems - or fails to start concentrator or does not receive messages.
RAK831 have SX1301, are you sure that firmware for SX1308 will work?
I am not
But should be easy to get it work…
We (n-fuse, a software and electronics company) have announced our SX1308 based concentrator card recently. We plan to offer it in shape of a pluggable USB dongle in metal enclosure similar to Semtech’s reference design as well.
Any luck finding a development board based on the SX1308? Thanks all.
One option discussed in recent days - no experience of it personally though I’m sure @will3509111 will happily sell you one