Hello. I have been using my TTIG for almost a year and have had no issues with it. It is migrated to V3 and claimed on The Things Network console. I noticed the other day the LED was flashing a fast green. It is normally a solid green. It has continued to flash green with no change. It is showing u…

Have you done a hard reset for a do-over on the local WiFi? In theory, once it’s connected, the server should set up everything. See: [image] New TTIG-868 gateway: no connection Your configuration seems correct. Can you try to do a reset? Basically hold the reset button …

Hello all. Thank you for your responses to things I could try to resolve my issue. I did attempt a reset. I held the reset down for >5s, then held the setup button for >10s, connected to wifi, save and reboot, and the behavior continued, which is the same as before - blinks slow green, then quick o…

You should be able to just go into The Things Stack console by way of https://console.cloud.thethings.network/ , then navigate to your region, and find your gateway under the Gateways section (clicking the ‘Go to gateways’ button). When you click into the detail section for your gateway you can click…

This worked. Deleting it, reclaiming it, and power cycling it did the trick. I am back up and running. Any insight on why that may have been necessary? Thanks.

[image] tmullin22: This worked Cool! I’d suspect that a reset at both ends resulted in an all fresh update & configuration - with so many moving parts it only takes a setting to look like it’s set but it’s not really set and it all gets out of sync.

Hi all, My TTIG connects to Wi-Fi but is always flashing green 1/4sec. I tried what was advised in this thread but to no avail. I tried multiple times to delete the gateway, reset TTIG, config wifi, open ports on the router, power cycle etc. Even though I claimed it, I find it odd that the EUI do…

[image] CEPE-AO: 58A0CBFFFE80226A Though console shows Claim GW successful are you sure all details correct and accurate? Esp the EUI = 58A0CBFFFE80226A A quick historic check shows this specific EUI was previously registered under the old TTN V2, where I assume it worked ok. If live during …

Thank you for looking into this! I’m sure that the EUI is correct, I checked it many times. This TTIG was used by an engineer who is now gone. I don’t know if it was live on or after Dec’21. The gateway has now moved location, but still in south Wales. Is there something that I can do to completel…

Hey gang, I think something might be wrong with the back end LNS (or something). I’ve got another person who is describing these symptoms on their longtime working TTIG, connected to Wi-Fi but not connecting to the back end (alternating between 1/4s flashing green for a period of time, then green/re…

Per the link share from a day day ago [image] Claiming TTIG problems (empty Gateway EUI in frontend) The Things Stack v3 Hi Krishna - thats 2 TTIgs showing GW EU = n/a in 2 hrs! Please see also and note my reply wrt old V2 use Note also in this case the new user (just…

Need professional support?

The Things Network

TTIG connects to Wi-Fi but is always flashing green

Gateways TTIG - The Things Indoor Gateway