Stockholm
Posts from Stockholm
25 posts · page 2 of 3flg-ttn-gw-1 firar 2.000.000!
Under nyårshelgen kom det 2 miljonte paketet! Gatewayen, en Cisco "IXM-LPWA-800-16-K9" togs i bruk i början av juni och har tuffat på utan några större avvikels
Temp och fuktsensor med antenn i PCB.
Efter att ha tabbat mig rejält på rev A av mitt LoRa-kort kom i fredags rev B. Efter lite småstrul med programmeringen när jag valde att inte sätta på kristall,
Stora förbättringar
Otroligt roligt att se vilka förbättringar som skett söder om stan. Där jag förut bara hade min GW (Hammarbyhöjden) som täckte har vi nu Goto10 som verkar fått
Pub walk May 12 starting at 16
Hello, The pub-walk is happening soon. We start with dinner at nya carnegie bryggeriet at 16 and start the walk around 17-18 https://www.nyacarnegiebryggeriet.s
Lora pub crawl
I suggest that we have a Stockholm pub meetup in May where we can meet and talk about Lora. We should also bring our lora & gps equipped devices so that we can
Some thoughts on IoT connectivity published on LinkedIn
I just published some thoughts on LinkedIn to help promote TTN and LoRa WAN. My new GW in the south has improved things, but we need another 5-10 GWs in Stockho
Taoglass antenna installed
I got my Barracuda antenna earlier in the week, and immediately installed it. Today I did some mapping, and the new antenna made a huge difference. Large areas
Covering southern outskirts
Got my IMST GW earlier this week. Today I have put it in a case and mounted it outside in Hammarbyhöjden. At 60 m over sea level, and free sight to west and sou
New permanent gateway installed! ✅
For Quantified Planet I have installed an Elsys ELG in the tower of Vaxholm Fortress. It is used for sensors in the area collecting data on water levels, air qu
Let's find more gateway partners!
I was talking to @brainstorm about how to move forward and grow TTN in Stockholm, and decided to set up a map of our future network. It's a google map where we
First LoRa node in Södermalm
I am running a gateway with ESP-1ch-Gateway software as I mentioned recently on twitter . Originally, I wanted to have it as a mobile/portable node for a projec
Gateway and first node working
Hello, Got my first gateway and node working. The gateway is a RP3+ic880spi and the node is a arduino + rn2483. Now I'm only going to get my antenna up little b