I recently got my hands on a Kerlink Wirnet iBTS compact. I updated it to the newest firmware (KEROS 4.1.6) and installed the Common Paket Forwarder. Unfortunately I was not able to get it to work with TTN and decided to do a factory reset and start all over.
Since doing the factory reset, I’m not able to install anything at all…I’m able to access the gateway via ssh (or the browser) and even trigger an update, but it all returns an installation error.
Here you can see what is written in the logfile:
2020.02.14-09:35:18 – Update from keros.ipk: ERROR (13)
2020.02.14-09:35:18 – Update Status : updated 0, failed 1 , partial 0 result : FAILURE
2020.02.14-09:35:19 – Firmware restored from stock
2020.02.14-12:45:19 – Update from lorad_1.1.5-1_klkgw.ipk: ERROR (12)
2020.02.14-12:45:19 – Update Status : updated 0, failed 1 , partial 0 result : FAILURE
2020.02.14-12:47:29 – Update from lorafwd_1.1.1-2_klkgw.ipk: ERROR (12)
2020.02.14-12:47:29 – Update Status : updated 0, failed 1 , partial 0 result : FAILURE
Here’s the error code from the kerlink wiki:
ERROR (12) - dependency issue
ERROR (13) - incompatible architecture
Did anybody experience something similar and is able to help?