Hi everybody, I have a little problem. I followed this tutorial: https://www.thethingsnetwork.org/docs/devices/uno/quick-start.html to get the device address of my Feather32u4. But the function ttn.showStatus(); returns only empty values. -- STATUS EUI: Battery: AppEUI: DevEUI: Does anybody …

yes, you are using a code example for the TNN uno. but you seems to use a Feather32U4…

Ahh okay, yes this is true. I’m using a Feather32u. Do you know which changes I need to make or where I can find informations?

use search ? [search] [image] Got Adafruit Feather 32u4 LoRa Radio to work and here is how End Devices (Nodes) There are a few tips spread over the forum and I want to bring the end-to-end instructions together here on how to get it to work. I still would go for the M0 …

I have the same problem but with The Things Uno. I’m using stock DeviceInfo code from examples ( changed frequPlan)

what OS do you use what arduino IDE version are the TTN libs installed did you select arduino leonardo did you then select a port (different then 1) could you upload the sketch without a problem ok now reset uno (press button on board) see if port changed and select that port open serial mo…

OS: Windows 7 IDE: Arduino 1.8.8 TNN libs installed: Yes Arduino Leonardo selected: Yes Current port COM17 The reset button trick worked. Port didn’t change but next time I tried to upload I got a notice that I should press the reset button again “during an upload” … that did it.

[solved]ttn.showStatus() returns empty values

How to get started

BoRRoZ October 8, 2018, 9:06pm 4

use search ?