Home Labs Stories SeedStudio LoRaWAN Gateway - built on RisingHF

SEEDSTUDIO LORAWAN GATEWAY - BUILT ON RISINGHF

image story

ABOUT THIS STORY


Posted on Oct. 15, 2017



Beginner
2 Hours

Introduction

Foundations & Clarifications

Hardware and Basic SW install

Installing the SW and setting up the Gateway

Configure the TTN-ZH Install

Up and Running

Introduction


This step-by-step guide is aimed at developers who want to develop their very own Lora gateway using the SeedStudio LoraWan Gateway (based on the RisingHF radio) + RPi - https://www.seeedstudio.com/LoRa%2FLoRaWAN-Gateway-915MHz-for-Raspberry-Pi-3-p-2821.html.

The Guide assumes basic knowledge of the Raspberry pi eco system, the hardware, associated Debian OS and the GPIO and peripherals present on the Raspberry Pi.

So lets get started: