Hello, i have a Mosquitto MQTT Server running on my NAS. I use the MQTT Server for my Home Assistant. I want to receive the Data from TTN in my Home Assistant. So i bridged the two MQTT Server I added following lines to my mosquitto.conf connection bridge address eu1.cloud.thethings.network:1…

The Payload was wrong. It works now. {"downlinks": [{ "f_port": 2, "frm_payload": "AQACWA==", "priority": "NORMAL", "confirmed": true}]}

[image] Profiler64: So i bridged the two MQTT Server I added following lines to my mosquitto.conf Sorry for intrusion but how did you configure the bridge in the Morquitto addon ? I’m killing my heal on that :frowning: I tried to add it in config of Mosquitto addon but it refuses it in the e…

I just added the lines i posted to the config file. You need to stop the mosquitto Server and then edit the file as sudo. Then restart. First i would connect to the TTN mqtt server with a mqtt explorer and would see if message arrive there. If yes, then add the lines to the bottom of the configure …

Hi, can i see your .yaml file to see the configuration in HA? tanks in advance.

I followed your configurations and in my HA I ran MQTT Publish with my configurations but does not pass the bridge to MQTT TTN.What is your solution? Thanks in advance.

Need professional support?

The Things Network

MQTT Downlink over Bridge Home Assistant

Application Development MQTT