End Devices (Nodes)   LMiC


Topic Replies Activity
Sleep the card lora32u4 5 November 13, 2018
RFM95 testing 23 May 25, 2019
Why does it start at 140? (LMIC_setSeqnoUp(140)) 4 July 22, 2019
[solved] Arduino-based device is joining and activating over and over 21 May 19, 2019
Power consumption with LMIC 6 May 17, 2019
[solved]raising LMIC_DEBUG_LEVEL is not increasing debug output 4 May 17, 2019
No Join response - but no indication of a Join request either 6 July 15, 2019
Sending two or more different sensor values independently 14 May 15, 2019
How can i use resend when node failed to send? 2 July 14, 2019
Issues with TTN and Cayenne 2 July 13, 2019
Weird result during ttn mapping 15 June 28, 2019
Decode Cayenne LPP message 3 June 17, 2019
Recent change in ADR handling in TNN and LMIC generate downlink loop 49 June 10, 2019
Dragino LoRa shield with LMIC and 1-Wire sensor problem 20 May 30, 2019
Dragino on Arduino Uno sending on different frequencies 3 March 19, 2019
Where to change freq to more channels for LMIC MCCI AS923? 4 May 16, 2019
LMIC Framework- Multi tasking 5 May 6, 2019
Otaa connection to things network 13 April 30, 2019
LMIC library basic documentation 4 February 20, 2019
How to efficiently assemble and extract a mix of integer and float data for TTN 4 April 20, 2019
LMIC get duty cycle timer for channel 9 April 16, 2019
AU915: Using channels 64 to 71 (500kHz) 5 April 8, 2019
Code to validate downlinks 2 March 30, 2019
What's the equivalence of name type u1_t and u4_t 3 January 28, 2019
How to control the RFM95 transmission 3 January 20, 2019
LMIC Library Always Does Unwanted Downlink 20 January 12, 2019
Writing APPKEY & DEVEUI to EEPROM removes leading zeros 5 January 10, 2019
Atmega 328P RFM95 shows EV_RESET when trying to send data 6 January 9, 2019
Dfrobot Firebeetle + LoRa Cover + TTN 9 January 4, 2019
LMIC.h ACK question 7 December 21, 2018