V2 to V3 Upgrade   Migrating Gateways to V3


Topic Replies Views Activity
How to Migrate Gateways from V2 to V3
guide

I’m writing this post as a quick draft that will be extended and eventually turned into a documentation page. Also see: TTN V2 to V3 migration - Migrate your gateways last! Before You Begin Gateways connected to V…

36 1846 June 12, 2021
About the Migrating Gateways to V3 category
0 135 February 1, 2021
TTN V2 to V3 migration
54 7638 June 23, 2021
Migration of TTIGs to The Things Stack CE (v3)
28 1240 June 21, 2021
TTIG migration to v3
2 84 May 29, 2021
Merge RaspberryPi HAT Gateway (rak2247) from V2 to V3
2 150 May 15, 2021
TTIG Registration Guidance
7 180 May 12, 2021
Gateway send to v2 and v3?
0 129 April 26, 2021
Adding a Multitech mlinux Gateway to v3
2 138 April 25, 2021
V2 to V3, gateway keeps status "disconnected"?
5 349 April 12, 2021
Failed to migrate gateway from v2 to v3
3 268 April 9, 2021
V3 Gateway status request via https fails with "unauthenticated"
3 153 March 29, 2021
Instructions we created to migrate Multitech IP67 gateways from TTNv2 to TTNv3
1 120 March 22, 2021
V3 local_conf.json "serv_gw_key": "what value?"
2 112 March 20, 2021
Connecting to both V2 and V3
2 161 March 16, 2021
Migrate RAK2245 from TTN to TheThingsStack v3
7 369 March 4, 2021
Gateway status:"disconnected" after migration from V2 to V3
14 503 March 2, 2021
Trouble with migration a RPi ic880A GW to V3
18 876 February 25, 2021
Server address documentation
0 159 February 21, 2021
The Things Gateway - will it work on V3?
5 411 February 17, 2021
The Things Indoor Gateway migration V2 to V3
10 824 February 12, 2021
Add Laird Basics Station TTN Stack V3
17 515 March 4, 2021