V2 to V3 Upgrade   Migrating Devices to V3


Topic Replies Views Activity
How to Migrate OTAA Devices from V2 to V3
guide

I’m writing this post as a quick draft that will be extended and eventually turned into a documentation page. Before you Begin We assume your gateway is still connected to V2. Your device will have to perform a new joi…

20 1067 March 5, 2021
How to Migrate ABP Devices from V2 to V3
guide

I’m writing this post as a quick draft that will be extended and eventually turned into a documentation page. :warning: Migrating existing ABP devices requires one of the following: Your gateway is connected to V3,…

55 1006 February 26, 2021
About the Migrating Devices to V3 category
0 79 February 1, 2021
Device Tutorial Migration V2 -> V3 does not work for me
1 65 April 7, 2021
The things upgrade v3 missing field "session.dev_addr"
10 125 April 7, 2021
Rx1 Delay Setting in V3 Console
20 278 April 7, 2021
Migrating Eastron devices from V2 to V3
3 88 March 31, 2021
Importing devices in V3 with JSON generated by V2 ttn-lw-migrate tool fails
8 214 March 30, 2021
Dragino V2 - V3 Migration (LHT65)
14 450 March 13, 2021
No data transfer to sensor node in V3
25 316 March 12, 2021
Migrating TABS/Browan sensors - remote reboot to trigger OTAA
10 189 March 8, 2021
Devices stopped to receive uplinks after v3 migration
18 242 March 4, 2021
Migration Procedure
13 256 March 3, 2021
Failed to migrate a Device from v2 to v3
51 486 February 28, 2021
How can I create new DevEUI in V3?
6 132 February 27, 2021
Migration of Devices Without Ability to Rejoin
16 188 February 24, 2021
Migrating Tektelic Smart Room Sensor devices to V3
0 72 February 17, 2021
MIC mismatch
7 156 February 18, 2021
How to migrate devices?
5 146 March 19, 2021
V2 evolution proposal to facilitate device migration
0 78 February 8, 2021